3M X90W User manual
1
This manual is only intended to explain Network Functions.
►Before using this product, read the “Product Safety Guide”
and related manuals to ensure proper use of this product. After reading them,
store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
X90w
Multimedia Projector
Network Functions
2
Contents
Caution …………………………………………………………………………………… 3
1. Main Functions ……………………………………………………………………… 5
1.1 Live Mode ………………………………………………………………………… 5
1.2 PC-LESS Presentation ………………………………………………………… 6
2. Equipment connection and network setting …………………………… 8
2.1 Required equipment preparation ……………………………………………… 8
2.2 Network connection using “One-Click-Communication”
function …………………………………………………………………………… 8
2.3 Manual network connection setting – Wired LAN - ……………………… 10
2.3.1 Equipments connection …………………………………………………… 10
2.3.2 Network settings …………………………………………………………… 11
2.3.3 “Internet Option” setting ………………………………………………… 14
2.3.4 Check connection…………………………………………………………… 15
2.4 Manual network connection setting – For wireless LAN - ……………… 16
2.4.1 Preparation for wireless LAN connection ……………………………… 16
2.4.2 Wireless LAN connection set up ………………………………………… 17
2.5 Conguring and Controlling the projector via a web browser…………… 19
2.5.1 Network Information ……………………………………………………… 22
2.5.2 Network Settings …………………………………………………………… 23
2.5.3 Port Settings ………………………………………………………………… 25
2.5.4 Mail Settings ………………………………………………………………… 26
2.5.5 Alert Settings ………………………………………………………………… 27
2.5.6 Schedule Settings…………………………………………………………… 32
2.5.7 Date/Time Settings ………………………………………………………… 34
2.5.8 Security Settings …………………………………………………………… 36
2.5.9 Projector Control …………………………………………………………… 38
2.5.10 Projector Status …………………………………………………………… 41
2.5.11 Network Restart …………………………………………………………… 41
2.5.12 Logoff………………………………………………………………………… 41
2.6 Utilize Web Remote Control …………………………………………………… 42
3. How to use Projector software – Basics - ………………………………… 44
3.1 How to use “MIU Live Viewer” ………………………………………………… 44
3.1.1 Install “MIU Live Viewer” ………………………………………………… 44
3.1.2 Software Installation Procedure ………………………………………… 45
3.1.3 Explanation of “MIU Live Viewer” ……………………………………… 46
3.1.4 Utilize “MIU Live Viewer” – Basic - ……………………………………… 50
3.2 Utilize “PC-LESS Presentation” – Basic - …………………………………… 52
4. Utilize projector – Advanced - ………………………………………………… 54
4.1 Utilize “MIU Live Viewer” – Advanced - ……………………………………… 54
4.1.1 Connect multiple PCs with one projector (Multiple PCs
connection) ………………………………………………………………… 54
4.2 Utilize “PC-LESS Presentation” – Advanced - ……………………………… 56
4.2.1 Thumbnail display ………………………………………………………… 57
4.2.2 Display in full screen ……………………………………………………… 59
4.2.3 Slide show …………………………………………………………………… 61
4.2.4 Directory display …………………………………………………………… 63
4.2.5 “PC-LESS Presentation” error message ……………………………… 66
4.3 Playlist ……………………………………………………………………………… 67
4.4 Failure & Warning Alerts via E-mail …………………………………………… 68
4.5 Projector management via SNMP……………………………………………… 70
4.6 Controlling the Projector via Scheduling …………………………………… 71
4.7 e-SHOT (Still Image Transfer) Display………………………………………… 74
4.8 Command Control via the Network …………………………………………… 75
5. Troubleshooting …………………………………………………………………… 80
6. Specications ……………………………………………………………………… 82
7. Warranty and After-sales service …………………………………………… 83
Contents
3
Caution
Caution
[Restriction in terms of inserts or pulls memory card and wireless LAN card]
Do not pull out the memory card and the wireless card while the power is on. The
memory card can be pulled out only while the card access LED (Red) is off.
CAUTION
nThe accompanying 802.11g wireless LAN card uses the 2.4GHz radio frequency band. You
do not need a radio license to use this card, but you should be aware of the following:
lDO NOT USE NEAR THE FOLLOWING!
• Microwave ovens
• Industrial, scientific or medical devices
• Designated low power radio stations
• Premises radio stations
Using the wireless LAN card near the above may result in radio interference, which in
turn may result in a decrease in communication speed and even a complete loss of
communication.
lDepending on the location where you attempt to use the wireless LAN card, there may be
interference with the radio waves, which may result in a decrease in communication speed
and even a complete loss of communication. In particular, please be aware that using the
wireless LAN card in locations where there is reinforced steel, other metals and concrete
may interfere with radio communication.
lAvailable Channels
The wireless LAN card uses the 2.4GHz radio frequency band, but depending on the
country or region you are in, you might be limited to the channels you can use. Please
refer to the following table for confirming where and with what channels you may use the
accompanying 802.11g wireless LAN card. Please consult with your dealer for countries
not included in the table.
Country or Region Available Channel
Japan 1 to 11
USA 1 to 11
Taiwan 1 to 11
Canada 1 to 11
UK, Spain, Germany, Italy, Austria, Switzerland,
Belgium, Sweden, Netherlands, Portugal,
Denmark, Finland, Greece, Norway, France,
Ireland, Luxembourg, Iceland
1 to 11
lYou may not bring the wireless LAN card into countries not listed above as there is
a possibility that use of the wireless LAN card in those countries could lead to an
infringement of established radio laws.
4
5
1. Main functions
1. Main functions
1.1
Live Mode
(Project images from PC
)
The main function of MIU (Multi Information processing Unit) is the Live Mode.
On Live Mode, the projector displays the screen appearing on the PC via network,
supported by “MIU Live Viewer” (Fig.1.1.a).
The “MIU Live Viewer” captures PC screen image using dedicated rmware
“MIU Live Viewer” and sends it to projector through wired LAN or wireless LAN
connection. (Refer to section 3 and 5 in detail.)
Fig. 1.1.a “MIU Live Viewer” outlines (through wireless LAN connection)
Fig. 1.1.b “MIU Live Viewer”
One projector can be connected with up to 4 PCs using “MIU Live Viewer”.
(Refer to section 4.1 in detail.)
6
1. Main functions
Other main function is “PC-LESS Presentation”. (Fig. 1.2.a) “PC-LESS
Presentation” has 4 kinds of display modes.
1.2 PC-LESS Presentation
(Display the images stored in SD card/USB memory.)
1) Thumbnail display: Display many stored images in SD card and USB memory
at once. (From now on, it is called “memory card” as SD card and USB memory
combined.)
2) Display in full screen: Display 1 picture or moving picture in full screen.
3) Slide show: Switch images with set intervals.
4) Directory display: Display directories and les stored in memory card as listed.
[Supported memory cards]
- SD card
- USB memory (USB memory type, USB Hard Disk and USB card
reader type)
Fig. 1.2.a “PC-LESS Presentation” outlines
“PC-LESS Presentation” can be controlled via keypad on the Projector or IR
Remote (refer 4.2 Utilize PC-LESS Presentation -Advanced).
You can also use “Remote Control” as shown in g. 1.2.b, which enables selecting
images, switching pages and switching display modes. “Remote Control” also
switches mode between “MIU Live Viewer” and “PC-LESS Presentation”.
6*7/$0#+.=5&?
+OCIG
;'5
'06'4
5.+&'5*19
2%.'55
24'5'06#6+10
/'07
+06'48#.5
5612
/1&'
10'6+/'
2.#;
56#46
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
㪈 㪉 㪊
㪌 㪍㪋
㪏 㪐㪎
㪈㪈 㪈㪉㪈㪇
• Exclude USB memory card reader that is acknowledged as multiple
drives when connected.
• Corresponding formats are FAT 12, FAT 16(FAT) and FAT 32. NTFS format in
not supported.
NOTE
7
1. Main functions
1.2 PC-LESS Presentation
(Display the images stored in SD card/USB memory.) (Continued)
Fig. 1.2.b Remote Control
• There are following limitations for le name and directory name in
PC-LESS Presentation.
(1) The projector's language setting is Japanese.
Only alpha-numeric characters and Japanese are supported.
(2) The projector's language setting is not Japanese.
Only alpha-numeric characters and Latin-1 characters are supported.
• Data cannot be read correctly depending on the type of USB hard disk, USB
memory and USB card reader.
• When your USB hard disk can use a DC power supply adapter, please use it.
NOTE
8
Followings are required for 1 projector and 1 PC connection. Multiple PC
connection is described in section 4.1.
2. Equipment connection and network setting
2. Equipment connection and network setting
2.1 Required equipment preparation
Projector: 1 unit
PC: 1 set (“MIU Live Viewer” installation is required for “MIU Live Viewer” usage.)
IEEE802.g wireless LAN equipment is required.
Depending on the type of wireless LAN card and PC you are using, the
projector may not be able to communicate properly with your PC, even
if the PC you are using is equipped with built-in wireless LAN function.
To eliminate communication problems, please procure a Wi-Fi certied
wireless LAN card.
LAN cable (in case of wired connection): 1 piece * 1
SD Wireless Network Card (in case of wireless connection): 1 unit * 2
Memory card (in case of “PC-LESS Presentation” usage): 1 piece
* 1: When a projector and a PC are connected, use CAT-5 (or greater) LAN cable.
* 2: Access point is required when wireless LAN connection is used as
Infrastructure mode.
This section explains how to connect network using “One-Click-Communication”
function. This function makes PC and projector network connection very easy
without complicated settings like IP address and SSID.
* This function cannot be used when multiple PCs or multiple projectors are
connected.
* The system of Windows2000 Professional Service Pack 4 or Windows XP and
the administrator authority are required to use “One-Click-Communication”
function. (Administrator authority)
* This function might not work depending on your used wireless LAN driver.
If so, setup the connection manually. (10, 16 and refer to the User Manuals for
your PC and wireless equipment.)
2.2 Network connection using “One-Click-Communication”
function
[Wired LAN connection]
1) When projector network settings such as IP address and subnet mask are
changed, need to return to the projector factory default Network settings.
qPress the menu button on remote control or the ▲/◄/►/▼ button on keypad.
Then OSD menu will be displayed. If Easy Menu is displayed, change the
menu to Advanced menu.
9
2. Equipment connection and network setting
2.2 Network connection using “One-Click-Communication” function
(Continued)
ePress the Reset key on remote control. Then Reset Menu will be displayed.
rPress the ▲ button to reset the Network settings.
/+7
4'5'6
%#0%'.
• SSID, WEP KEY will be set to factory default settings.
• If you like to set these items, please set again from WEB (19).
NOTE
2) Connect PC and projector using LAN cable to make it ready for communication.
* In case of connecting with existing network, contact your network administrator.
3) Start up “MIU Live Viewer”. Window appears in g. 2.2.a. (Refer to section 3.1
how to use “MIU Live Viewer”.)
Fig. 2.2.a “MIU Live Viewer” initial window
/'07=4)$?
2+%674'
5'.'%6
+/#)'
5'672
+0276
126+10
/+7
'#5;/'07
5%4''0
.+8'/1&'
2%.'5524'5'06#6+10
5'672
G5*16
+0(14/#6+10
5'48+%'
wSelect the MIU menu by using ▲/▼ button.
10
2. Equipment connection and network setting
4) Click “One-Click” button in g. 2.2.a. Projector is found. Then capture start
button is pushed and real time display is started automatically.
2.2 Network connection using “One-Click-Communication” function
(Continued)
[Wireless LAN connection]
1) When projector network settings such as IP address and subnet mask are
changed, need to return to the projector factory default settings. (9)
2) In case 802.11b/g wireless LAN device is built-in the PC, make the LAN valid
and other network connections invalid. If wireless LAN device is not built in the
PC, connect 802.11b/g wireless LAN device and install device driver to the PC.
(Refer to the user guide for wireless LAN device details.)
3) Start up “MIU Live Viewer”, then the window appears (shown in g. 2.2.a).
4) Click “One-Click” button as shown in g. 2.2.a. Then projector will be found
and the capture start button is activated then real time display is started
automatically.
When you need to set the original IP address and SSID other than factory default
settings, need to set up network connection manually.
This section explains how to set up network connection manually.
2.3 Manual network connection setting – Wired LAN -
At rst, connecting projector and PC with wired LAN connection to check PC
setting and connection. Next section explains PC settings.
Connecting projector with network using LAN cable, and then set it ready to
communicate with PC.
* Connecting with existing network, contact network administrator.
At last, turn on the projector. This is the end of Equipments connection.
2.3.1. Equipments connection
Other manuals for X90W
4
This manual suits for next models
1
Table of contents
Other 3M Projector manuals
