3B SCIENTIFIC PHYSICS 1013377 User manual

3B SCIENTIFIC®PHYSICS

Stereo-Zoom Microscope, 45x Trinocular

115 V, 50/60 Hz: 1013377 / 230 V, 50/60 Hz: 1013378

Instruction Manual

08/13 ALF 1 Eyepiece

2 Tube

3 Slider for changing beam path (not

visible)

4 Head lock screw

5 Zoom objective

6 Specimen clips

7 Object plate

8 Base

9 Rotary switch for transmitted light

10 Rotary switch for top light

11 Mains switch (not visible)

12 Top light housing

13 Adjustment knob for focusing

14 Lock-screw (not visible)

15 Adjustment knob for zoom objective

16 Pillar

17 Vertical tube

18 Power supply for top light

1. Safety notes

•For power supply use only electrical sockets

with ground contact.

Caution! The Stirling engine becomes hot during

use. Risk of burns!

•Do not touch the lamp during or immediately

after use.

2. Description, technical data

The stereo zoom microscope allows three-

dimensional viewing of objects in 7x to 45x

magnification and a eyepiece camera (e.g.

1003259, 1013379 and 1013380) to be attached

for documenting work in the form of photographs

and videos.

The microscope 1013377 is for operation with a

mains voltage of 115 V (±10%), and the

1013378 unit is for operation with 230 V (±10%).

Stand: Metal stand, column firmly connected

with base, pinion knobs attached on both sides

of the stand for coarse and fine focusing

Tube: Binocular inclined 45° and vertical tube,

interocular distance adjustable between 54 and

75 mm, head rotatable by 360°

Eyepieces: Pair of wide field eyepieces WF 10x

20 mm, rubber eyepiece cups

Objectives: Zoom objective, 0.7x to 4.5x

Enlargement: 7x to 45x

Diameter of Image Field: 4.4 mm to 28.6 mm

Distance from Specimen: 100 mm

Maximum Height of Object: 80 mm

Object Plate: Base with detachable object

plates (plastic, black/white and glass) 95 mm

diam. and 2 specimen clips

Illumination: Top, transmitted and mixed light

illumination, adjustable 12 V, 15 W halogen

lamp, power supply 115 V resp. 230 V 50/60 Hz

Dimensions: 250 x 220 x 350 mm³ approx.

Weight: 6kg approx.

3. Unpacking and assembly

The microscope is packed in a molded styro-

foam container.

•Take the container out of the carton remove

the tape and carefully lift the top half off the

container. Be careful not to let the optical

items (objectives and eyepieces) drop down.

•To avoid condensation on the optical compo-

nents, leave the microscope in the original pack-

ing to allow it to adjust to room temperature.

•Using both hands (one around the pillar and

one around the base), lift the microscope

from the container and put it on a stable desk.

•Put the head onto the top of the stand and

tighten the head-lock-screw. Insert the eye-

pieces into the tube.

•Screw the housing for the top light into its

holder and plug the power supply connector

into the socket on the stand pillar.

•Insert the object plate into the stage opening

in the base.

4. Operation

4.1 General information

•Set the microscope on a level table.

•Place the object to be observed in the center

of the object plate. Use the clips to fasten it

into place.

•Connect the mains cable to the net and turn

on the switch to get the object illuminated.

•When using transmitted- or mixed-light illu-

mination replace black and white plate with

the glass plate.

•Adjust the interpupillary distance between

the eyepieces by grasping the two prism-

housings with both hands and moving them

until one circle of light can be seen.

•Use the knob for the zoom objective to set

the required magnification.

•Focus the object by turning the side knobs.

•It might be necessary to loosen the lock-

screw and raise or lower the entire stereo

head-bracket until the outline of the object is

found in the field of view.

•Be sure to tighten the lock-screw to fix the

height of the stereo head on the pillar.

•Always turn off the light immediately after use.

•Be careful not to spill any liquids on the mi-

croscope.

•Do not mishandle or impose unnecessary

force on the microscope.

•Do not wipe the optics with your hands.

•Do not attempt to service the microscope yourself.

4.2 Changing the lamps

•Turn off the power switch, unplug the mains

plug and let the lamp cool down.

•In order to change the bulb for the top light,

undo the screw at the side, remove the lamp

housing and remove the plug from the stand

pillar.

•Use a flat tool (e.g. screwdriver) to gently (!)

lift the clip and pull the lap socket out of the

housing (see Fig.1).

•Replace the faulty bulb with a new one.

•Screw the lamp housing back into the holder

and connect the power supply again.

Fig. 1 Changing the bulb in the top light

•To change the lamp of bottom light remove

the cover from the base opening.

•Replace the defect the lamp by a new one.

•Remount the cover.

4.3 Changing the fuse

•Turn off the power switch and unplug the

mains plug.

•Unscrew the fuse holder on the back of the

stand base with a screwdriver.

•Replace the fuse and reinsert the holder in

its socket.

4.4 Fitting an ocular camera

•Screw the camera adapter onto the vertical

eyepiece.

•Put the ocular camera in the adapter and

connect it to a computer.

The camera can be put into use by means of the

slider for changing the beam path.

3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Germany • www.3bscientific.com

Subject to technical amendments

When the slider is pushed all the way in, the

object can be viewed through the binocular eye-

piece.

When the slider is all the way out, the camera is

activated so that photos or videos can be re-

corded.

5. Storage, cleaning, disposal

•Keep the microscope in a clean, dry and

dust free place.

•When not in use always cover the micro-

scope with the dust cover.

•Do not expose it to temperatures below 0°C

and above 40°C and a max. relative humid-

ity of over 85%.

•Always unplug the mains plug before clean-

ing or maintenance.

•Do not clean the unit with volatile solvents or

abrasive cleaners.

•Do not disassemble objective or eyepieces

to attempt to clean them.

•Use a soft linen cloth and some ethanol to

clean the microscope.

•Use a soft lens tissue to clean the optics.

•The packaging should be disposed of at

local recycling points.

•Should you need to dis

pose of the equipment it-

self, never throw it awa

in normal domesti

waste. Local regulations

for the disposal of electri-

cal equipment will apply.

Other manuals for 1013377

This manual suits for next models

Other 3B SCIENTIFIC PHYSICS Microscope manuals

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 200 1013364 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS M 100 1005401 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1005405 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS BS-200 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 400 1003276 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 300 LED 1013366 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1005434 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1005438 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 200 1003266 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1013153 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 100 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1013373 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 400 1003277 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1012404 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 500 1013146 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1013373 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 1005436 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 400 1003276 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 300 1003271 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 400 1003277 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 500 1003278 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 400 1003274 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS BS-200 User manual

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 400 1003274 User manual

Popular Microscope manuals by other brands

Thermo Scientific

Thermo Scientific Nicolet iN10 Using

National

National DC3-163 instructions

KERN Optics

KERN Optics OPE-1 User instructions

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Operation manual

Prior

Prior Lux POL operating instructions

Opitec

Opitec Smartscoop 115615 instructions

KERN

KERN OPO-1 operating instructions

Topcon

Topcon SP-1P user manual

Motic

Motic PA43 Operation manual

Leica

Leica DVM5000 Setup manual

MshOt

MshOt MZ62 user manual

KERN Optics

KERN Optics OZR-5 User instructions

VWR

VWR VisiScope 384 Series instruction manual

Nikon

Nikon ECLIPSE E200 POL instructions

Leica

Leica DI C800 User's manual & installation instructions

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

Olympus

Olympus SZ61 instructions