Thermo Scientific SL40 User manual

50119930-4 October 2009

Thermo Fisher Scientific

Thermo Scientific SL40

Thermo Scientific SL40R

Instruction Manual

BIOLinerTM, BIOShieldTM, HIGHPlateTM, HIGHConicTM, AutoLockTM, FIBERLite TM and

CLINIConicTM are either registered trademarks or trademarks of Thermo Fisher Scientific.

All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the product

operation. This document is copyright protected and any reproduction of the whole or any part of this document is

strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information in this document is

for reference purposes only. System configurations and specifications in this document supersede all previous

information received by the purchaser.

Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-free and

assumes no responsibility and will not be liable for any errors, omissions, damage or loss that might result from

any use of this document, even if the information in the document is followed properly.

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This

document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of Sale

shall govern all conflicting information between the two documents.

Release history: 50119930-4 printed in October 2009.

For Research Use Only. Not for use in diagnostic procedures.

WEEE Conformity

This product is subject to the regulations of the EU Waste Electrical & Electronic Equipment (WEEE)

Directive 2002/96 It is marked by the symbol opposite:

Thermo Fisher Scientific has entered into agreements with recycling and disposal companies in all EU

Member States for the recycling and disposal of this device. For information on recycling and disposal

companies in Germany and on the products of Thermo Fisher Scientific, which fall under the RoHS

Directive (Restriction of the use of certain hazardous substances in electrical and electronic equip-

ment), please visit the website www.thermo.com/WEEERoHS.

Thermo Scientific SL40 / 40R i

Preface .......................................................................................................................................iii

Scope of Supply ........................................................................................................................iii

Proper Use .................................................................................................................................iii

Accident Prevention ................................................................................................................ iv

Precautions ............................................................................................................................... iv

Chapter 1 Introduction and Description ...............................................................................................1-1

Characteristics ..........................................................................................................1-2

Technical Data .........................................................................................................1-3

Directives, Standards and Guidelines ....................................................................................... 1-4

Functions and Features ............................................................................................................ 1-5

Mains Supply ...........................................................................................................1-5

Rotor Selection .........................................................................................................1-6

Chapter 2 Before use ................................................................................................................................2-1

Before Setting up ......................................................................................................2-2

Transporting the Centrifuge .....................................................................................2-2

Location ...................................................................................................................2-2

Aligning the Centrifuge ............................................................................................2-3

Mains Connection ....................................................................................................2-3

Storage .....................................................................................................................2-4

Chapter 3 Control Panel ...........................................................................................................................3-1

Keys .........................................................................................................................3-2

Control Panel ...........................................................................................................3-2

Chapter 4 Operation .................................................................................................................................4-1

Switch on Centrifuge ................................................................................................4-2

Lid Opening .............................................................................................................4-2

Close Lid ..................................................................................................................4-2

Rotor Installation .....................................................................................................4-2

Entering Parameters .................................................................................................4-4

Saving Programs .......................................................................................................4-6

Centrifugation ..........................................................................................................4-7

Temperature Adaptation during Standstill ................................................................4-8

Short-term Centrifugation ........................................................................................4-8

Removing the Rotor .................................................................................................4-8

Aerosol-tight Rotors .................................................................................................4-9

Switching the Centrifuge off .....................................................................................4-9

Table of Contents

ii SL40 / 40R Thermo Scientific

Chapter 5 System Menu .......................................................................................................................... 5-1

Chapter 6 Maintenance and Care ......................................................................................................... 6-1

Cleaning Intervalls ................................................................................................... 6-2

Cleaning .................................................................................................................. 6-2

Disinfection ............................................................................................................. 6-3

Decontamination ..................................................................................................... 6-4

Autoclaving .............................................................................................................. 6-5

Service of Thermo Fisher Scientific .......................................................................... 6-6

Chapter 7 Troubleshooting ..................................................................................................................... 7-1

Mechanical Emergency Lid Release .......................................................................... 7-2

Troubleshooting by User ......................................................................................... 7-3

When to contact Customer Service .......................................................................... 7-6

Chemical Compatibility Chart ..............................................................................A-1

Contact Information ................................................................................................B-1

Thermo Scientific SL40 / 40R iii

Preface

Before starting to use the centrifuge, read through this instruction manual carefully and follow the

instructions.

The information contained in this instruction manual is the property of Thermo Fisher Scientific; it is

forbidden to copy or pass on this information without explicit approval.

Failure to follow the instructions and safety information in this instruction manual will result in the

expiration of the sellers warranty.

Scope of Supply

If any parts are missing, please contact the nearest Thermo Fisher Scientific representative.

Proper Use

•This centrifuge is an IVD accessory, and therefore subject to the Directive 98/79/EC of the

European Parliament and the Council of October 27, 1998 on in vitro diagnostic medical devices.

•This centrifuge is a laboratory product designed to separate components by generation of Relative

Centrifugal Force. It separates human samples (e.g. blood, urine and other body fluids) collected

in appropriate containers, either alone or after addition of reagents or other additives.

•As general-purpose centrifuge, it is designed to also run other containers filled with chemicals,

environmental samples and other non-human body samples.

•This centrifuge should be operated by trained specialists only.

Article Number Quantity Check

Centrifuge Thermo Scientific SL40 1

Power supply cable 1

50119930 Instruction manual 1

70009824 Anti-corrosion oil 1

PAccident Prevention

iv SL40 / 40R Thermo Scientific

Accident Prevention

Prerequisite for the safe operation of the Thermo Scientific SL40 / 40R is a work environment in

compliance with standards, directives and trade association safety regulations and proper instruction

of the user:

The safety regulations contain the following basic recommendations:

•Maintain a radius of at least 30 cm around the centrifuge.

•Implementation of special measures which ensure that no one can approach the centrifuge for

longer than absolutely necessary while it is running.

•The mains plug must be freely accessible at all times. Pull out the power supply plug or

disconnect the power supply in an emergency.

Precautions

In order to ensure safe operation of the Thermo Scientific SL40 / 40R, the following general safety

regulations must be followed:

•Do not manipulate the safety devices.

•The centrifuge should be operated by trained specialists only.

•The centrifuge is to be used for its intended purpose only.

•Plug the centrifuge only into sockets which have been properly grounded.

•Do not move the centrifuge while it is running.

•Use only rotors and accessories for this centrifuge which have been approved by Thermo Fisher

Scientific. Exceptions to this rule are commercially available glass or plastic centrifuge tubes,

provided they have been approved for the speed or the RCF value of the rotor.

•Do not use rotors which show any signs of corrosion and/or cracks.

•Do not touch the mechanical components of the rotor and do not make any changes to the

mechanical components.

•Use only with rotors which have been properly installed. Follow the instructions on the Autolock

in section “Rotor installation” on page 4-5.

•Use only with rotors which have been loaded properly. Follow the instructions given in the rotor

manual.

•Never overload the rotor. Follow the instructions given in the rotor manual.

•Never start the centrifuge when the lid is open.

•Never open the lid until the rotor has come to a complete stop and this has been confirmed in

the display.

P Precautions

Thermo Scientific SL40 / 40R v

•The lid emergency release may be used in emergencies only to recover the samples from the

centrifuge, e.g. during a power failure (see section “Mechanical emergency lid release” on

page 7-2).

•Never use the centrifuge if parts of its cover panels are damaged or missing.

•Do not touch the electronic components of the centrifuge or alter any electronic or mechanical

components.

•Please observe the safety instructions.

Please pay particular attention to the following aspects:

•Location: well-ventilated environment, set-up on a level and rigid surface with adequate load-bearing

capacity.

•Rotor installation: make sure the rotor is locked properly into place before operating the

centrifuge.

•Especially when working with corrosive samples (salt solutions, acids, bases), the accessory parts and

vessel have to be cleaned carefully.

•Always balance the samples.

centrifugation hazardous substances:

•Do not centrifuge explosive or flammable materials or substances which could react violently with

one another.

•The centrifuge is neither inert nor protected against explosion. Never use the centrifuge in an

explosion-prone environment.

•Do not centrifuge inflammable substances.

•Do not centrifuge toxic or radioactive materials or any pathogenic micro-organisms without

suitable safety precautions.

When centrifugation microbiological samples from the Risk Group II (according to the

"Laboratory Bio-safety Manual" of the World Health Organization WHO), aerosol-tight

biological seals have to be used.

For materials in a higher risk group, extra safety measures have to be taken.

•If toxins or pathogenic substances have gotten into the centrifuge or its parts, appropriate

disinfection measures have to be taken (see “Disinfection” on page 6-4).

•Highly corrosive substances which can cause material damage and impair the mechanical stability

of the rotor, should only be centrifuged in corresponding protective tubes.

IF A HAZARDOUS SITUATION OCCURS, TURN OFF THE POWER SUPPLY TO THE

CENTRIFUGE AND LEAVE THE AREA IMMEDIATELY.

Normal use

The centrifuge is to be used for separating materials of different density or particle size suspended in a

liquid.

Maximum sample density at maximum speed: 1,2 g

cm3

-----------

PPrecautions

vi SL40 / 40R Thermo Scientific

The symbol on the left refers to general hazards.

ATTENTION means that material damage could occur.

WARNING means that injuries or material damage or contamination could occur.

The symbol on the left refers to biological hazards.

Observe the information contained in the instruction manual to keep yourself and your

environment safe.

This manual suits for next models

Table of contents

Other Thermo Scientific Laboratory Equipment manuals

Thermo Scientific

Thermo Scientific 3920 Operating instructions

Thermo Scientific

Thermo Scientific Centra-W Cell Washer User manual

Thermo Scientific

Thermo Scientific TSX Series Owner's manual

Thermo Scientific

Thermo Scientific Precision WB159915 User manual

Thermo Scientific

Thermo Scientific NESLAB EX Series General instructions

Thermo Scientific

Thermo Scientific 700 Series Installation manual

Thermo Scientific

Thermo Scientific MaxQ 7000 User manual

Thermo Scientific

Thermo Scientific HESI-II Probe User manual

Thermo Scientific

Thermo Scientific 500 User manual

Thermo Scientific

Thermo Scientific Compact Digital MicroPlate Shaker User manual

Thermo Scientific

Thermo Scientific iCAP 7000 Series User manual

Thermo Scientific

Thermo Scientific Nicolet Summit User manual

Thermo Scientific

Thermo Scientific Heracell 150i GP User manual

Thermo Scientific

Thermo Scientific 88882011 User manual

Thermo Scientific

Thermo Scientific Jewett 430 Guide

Thermo Scientific

Thermo Scientific 3625A User manual

Thermo Scientific

Thermo Scientific Agilent 1100 Series User manual

Thermo Scientific

Thermo Scientific Orbitrap Fusion Lumos User manual

Thermo Scientific

Thermo Scientific 815 Operating instructions

Thermo Scientific

Thermo Scientific RIIDEye X-G User manual

Thermo Scientific

Thermo Scientific SHKE8000 Series User manual

Thermo Scientific

Thermo Scientific Sorvall BIOS A User manual

Thermo Scientific

Thermo Scientific Thermo Scientific Barnstead Nanopure Life Science 2114... User manual

Thermo Scientific

Thermo Scientific Invitrogen Qubit Flex Fluorometer User manual

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide