2
Operating manual neoTower® Premium L / 03.2017
Contents
1. Document information. . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Validity. . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Supporting documents. . . . . . . . . . . . . . . . . 4
1.3 Safety instructions . . . . . . . . . . . . . . . . . . . 5
1.4 Explanation of symbols . . . . . . . . . . . . . . . . 5
2. Safety information ...........................6
2.1 Intended use . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Authorised target groups . . . . . . . . . . . . . . . 6
2.2.1 Manufacturer........................ 6
2.2.2 Operator............................ 6
2.2.3 Trained personnel .................... 6
2.2.4 User ............................... 6
2.3 General safety instructions . . . . . . . . . . . . . . 7
3. Product information..........................8
3.1 Functional principle . . . . . . . . . . . . . . . . . . 8
3.2 Registering with the energy provider . . . . . . . . . 8
3.3 Modes of operation . . . . . . . . . . . . . . . . . . 8
3.3.1 Ready for e-car charging button ........ 8
3.3.2 Summer operation ................... 8
3.3.3 Heat-optimised ...................... 8
3.3.4 Electricity-optimised .................. 8
3.3.5 Shutdown........................... 8
3.4 Safety devices. . . . . . . . . . . . . . . . . . . . . . 9
3.5 Product variants . . . . . . . . . . . . . . . . . . . . 9
3.6 Product overview . . . . . . . . . . . . . . . . . . . 10
3.6.1 Generation unit ..................... 10
3.6.2 Control cabinet ..................... 10
3.6.3 Modem............................ 10
3.6.4 Calorific value heat exchanger (only
with variant "neoTower® 50.0 Calorific
value”) ............................ 11
3.7 Scope of supply . . . . . . . . . . . . . . . . . . . . 11
4. Assembly..................................12
4.1 Safety instructions for assembly . . . . . . . . . . 12
4.2 Installation location requirements . . . . . . . . . 12
4.2.1 Overview of the installation location ... 12
4.2.2 Premises........................... 13
4.2.3 Heating system ..................... 14
4.2.4 Flue............................... 14
4.2.5 Exhaust air duct..................... 14
4.2.6 Fresh air supply ..................... 14
4.2.7 Gas supply ......................... 14
4.2.8 Water supply ....................... 15
4.2.9 Condensate drain ................... 15
4.2.10 Power supply ....................... 15
4.2.11 Mobile communications network ...... 15
4.3 Assembly steps . . . . . . . . . . . . . . . . . . . . 16
4.3.1 Preparing for assembly ............... 16
4.3.2 Unpacking the system................ 16
4.3.3 Positioning the generation unit ........ 17
4.3.4 Screwing the control cabinet in position 17
4.3.5 Connecting the generation unit
(neoTower® 50.0 Standard,
neoTower® 50.0 High temperature) .... 18
4.3.6 Connecting the generation unit
(neoTower® 50.0 Calorific value) ....... 21
4.3.7 Connecting the temperature sensors ... 25
4.3.8 Connecting the modem .............. 25
4.3.9 Connecting the battery............... 26
4.3.10 Connecting the control cabinet ........ 26
4.3.11 Checking the connections ............ 27
5. Commissioning .............................28
6. Operation .................................29
7. Cleaning...................................30
8. Storage ...................................31
9. Service repairs .............................32
9.1 Maintenance . . . . . . . . . . . . . . . . . . . . . 32
9.2 Fault resolution . . . . . . . . . . . . . . . . . . . . 33
9.3 Repair . . . . . . . . . . . . . . . . . . . . . . . . . 33
10. Disassembly ...............................34
11. Disposal...................................35
11.1 Disposing of packaging. . . . . . . . . . . . . . . . 35
11.2 Disposing of the system . . . . . . . . . . . . . . . 35
