ABOUT THIS MANUAL
Purpose
This manual describes the assembly, installation and troubleshooting of this unit. Please read
this manual carefully before installations and operations. Keep this manual for future
reference.
Scope
This manual provides safety and installation guideline as well as information on tool and
wiring.
SAFETY INSTRUCTIONS
The manual and other documents must be stored in a convenient place and be available at
all times. Before using the unit, read all instructions and cautionary markings on the unit the
batteries and all appropriate sections of this manual. We assume no liability for any damage
caused by failure to observe these instructions.
CAUTION -To reduce rise of injury, charge only deep - cycle lead acid type rechargeable
batteries. Other types of batteries may burst, causing personal injury and damage.
Do not disassemble the unit. Take it to a qualified service center when service or repair is
required. Incorrect re-assemble may result in a risk of electric shock or fire.
To reduce risk of electric shock, disconnect all wirings before attempting any maintenance
or cleaning. Turning off the unit will not reduce this risk.
CAUION - Only qualified personnel can install this device with battery.
NEVER charger a frozen battery.
For optimum operation of this energy storage inverter, please follow required spec to select
appropriate cable size. It's very important to correctly operate this energy storage inverter.
Be very cautious when working with metal tools on or around batteries. A potential risk
exists to drop a tool to spark or short circuit batteries or other electrical parts and could cause
an explosion.
Please strictly follow installation procedure when you want to disconnect AC or DC terminals,
Please refer to INSTALLATION section of this manual for the battery supply.
Fuse 2 pieces of 200A,58VDC for 9KW,3pieces of 200A,58VDC for 12KW, are provided as
over-current protection for the battery supply.
GROUNDION INSTRUCTIONS-This energy storage inverter should be connected to a
permanent grounded Wiring system. Be sure to comply with local requirements and regulation
to install this inverter.
NEVER cause AC output and DC input short circuited.Do NOT connect to the mains when
DC input short circuits.
Warning!!Only qualified service persons are able to service this device. If errors still persist
after following troubleshooting table, please send this energy storage inverter back to local
dealer or service center for maintenance.
Caution - We will not be responsible for any breakdown or damage caused by transportation,
movement or negligence after purchase.
Caution - We are not responsible for failures caused by the use of the power supply
conditions or the site environment not specified in the electrical specifications of the inverter.
