RCF C-BR 10 Q15 User manual
FLYING BRACKET C-BR 10° Q 15
Q 15 SPEAKERS 10° FLYING BRACKET
STAFFA SOSPENSIONE 10° PER DIFFUSORI Q 15
OWNER’S MANUAL
MANUALE UTENTE
3
CONTENTS
ENGLISH ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4
ITALIANO ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 10
4
EN
SAFETY PRECAUTIONS AND GENERAL INFORMATION
The symbols used in this document give notice of important operating instructions and warnings which must be strictly followed�
CAUTION Important operating instructions: explains hazards that could damage a product, including data loss
WARNING Important advice concerning the use of dangerous voltages and the potential risk of electric shock,
personal injury or death�
IMPORTANT NOTES Helpful and relevant information bout the topic
SUPPORTS, TROLLEYS AND CARTS Information about the use of supports, trolleys and carts� Reminds to move with extreme caution and never tilt�
WASTE DISPOSAL This symbol indicates that this product should not be disposed with your household waste, according to the
WEEE directive (2012/19/EU) and your national law�
IMPORTANT NOTES
This manual contains important information about the correct and safe use of the device� Before connecting and using this product, please read this instruction manual carefully and keep
it on hand for future reference� The manual is to be considered an integral part of this product and must accompany it when it changes ownership as a reference for correct installation
and use as well as for the safety precautions� RCF S�p�A� will not assume any responsibility for the incorrect installation and / or use of this product�
IMPORTANT NOTES
Suspending any object is a potentially dangerous operation and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of rigging
objects overhead� RCF strongly recommends that all speakers should be suspended taking into account all current national, federal, state and local regulations� It is the responsibility
of the installer to ensure that all speakers are safely installed in accordance with all such regulations� RCF strongly recommends to inspect the system at least once a year� If any sign
of weakness or damage is detected remedial actions should be taken immediately� The user is responsible for making sure that the supporting surfaces and any additional hardware
used is capable of supporting the system� Any hardware used to suspend a loudspeaker array that is not provided by or associated with RCF is not reccomended and is under the
responsibility of others�
SAFETY PRECAUTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all the instructions
5. Install in accordance with manufacturer’s instructions
6. Only use attachments and accessories specified by the manufacturer
7. All the precautions, in particular the safety ones, must be read with special attention, as they provide important information�
Never attempt to carry out any operations, modifications or repairs that are not expressly described in this manual.
RCF S.p.A. strongly recommends this product is only installed by professional qualified installers (or specialised firms) who can ensure correct installation and
certify it according to the regulations in force.
IMPORTANT NOTES
RCF declines all responsabilities if the user applies this accessory to other configurations not mentioned in this manual.
RCF S.p.A. reserves the right to make changes without prior notice to rectify any errors and / or omissions.
Always refer to the latest version of the manual on www.rcf.it.
5
EN
VERTICAL HANGING WITH A 10° ANGLE
Using the C-BR 10° it is possible to reduce the opening angle from 22�5° to 10°�
PACKAGE CONTENT:
- 2 X C-BR 10° BRACKETS
1. Unscrew the 8 screws from the Top Plate Aand remove it�
2. Remove the two plates located under the top one:
Ba Link Plate (with 6 holes)
Can External Plate (with 2 holes)
A
A
B
C
6
EN
3. Place the C-BR 10° Das shown in the pictures below�
-On the top and following speakers of the cluster, the External Plate Cmust be placed next to the C-BR 10°, as shown in FIGURE 1.
-On the bottom speaker of the cluster the External Plate Cmust be placed as shown in FIGURE 2.
4. For the top and following speakers, place back theTop Plate on its position and screw it back with only six screws, leaving the two bottom holes
empty� For the Bottom speakers screw back the Top Plate with all the 8 screws�
NOTE: The Top Plate Amust be always screwed back on its position.
VERTICAL HANGING WITH A 10° ANGLE
FIGURE 1
(Top and following speakers)
(Top and following speakers)
C
D
FIGURE 2
(Bottom speaker)
(Bottom speaker)
C
D
AA
7
EN
5. Now place the Vertical Fly Bar on top of a Q15 speaker and screw it with the 4 screws provided�
The protruding part of the 10° bracket of the lower speaker must be inserted on the respective seat on the upper speaker� Then depending on
which angle is chosen, screw in the last two screws�
NOTE: The exact same operations must be done on both sides of the speaker
NOTE: The exact same operations must be done on both sides of the speaker
VERTICAL HANGING WITH A 10° ANGLE
8
EN
EXAMPLES OF CONFIGURATIONS
Now with the the vertical flybar FLY BAR FL-B V Q 15 you can hang vertically multiple Q 15 speakers (maximum 6)�
10°
10°
10°
10°
10°
EXAMPLE
6 X 10° modules
9
EN
EXAMPLES OF CONFIGURATIONS
10°
10°
22.5°
10°
10°
22.5°
22.5°
10°
22.5°
22.5°
10°
10°
22.5°
10°
10°
22.5°
22.5°
10°
22.5°
22.5°
EXAMPLE
4 X 10° modules + 2 x 22�5° modules
10
EN
EXAMPLES OF CONFIGURATIONS
10°
10°
22.5°
10°
10°
22.5°
22.5°
10°
22.5°
22.5°
10°
10°
22.5°
10°
10°
22.5°
22.5°
10°
22.5°
22.5°
EXAMPLE
3 X 10° modules + 3 x 22�5° modules
Table of contents
Languages:
Other RCF TV Mount manuals
