Premier Mounts CONVERGENT TVF Series User manual
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
2620 Palisades Drive, Corona, CA 92882 USA
9500275 v1.4
publ. 01/24/19
SERIES: TVF
INSTALLATION GUIDE
Convergent Series Video Wall Mount
For Leyard TVF LED Cabinets
Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
Page 2
METHOD 1 METHOD 2
Assemble the mount before installing into
place (for single unit or small array).
Install piece by piece on a located wall (for
multiple or large video wall array).
CAUTION STATEMENTS
1. READ ALL STEPS WITHIN THIS MANUAL BEFORE INSTALLING THE MOUNT. LEYARD TVF LED
SERIES INSTALLATION GUIDE MUST BE READ IN CONJUNCTION FOR SUCCESSFUL
INSTALLATION. ANY QUESTIONS? CALL PREMIER MOUNTS.
2. INSTALLATION MUST MEETS THE REQUIREMENTS APPROVED BY THE STRUCTURAL ENGINEER.
3. FRAME MUST BE PLUMBED, SQUARED, LEVELED, X, Y, AND Z ALIGNED PRIOR TO INSTALLATION OF
ANY DISPLAYS.
4. ALL LED CABINETS MUST BE POWER ON TESTED PRIOR TO ANY INSTALLATION.
5. PREMIER MOUNTS RECOMMENDS THE HANDLING LED CABINETS BY AN INDUSTRY QUALIFIED
PROFESSIONAL.
6. PREMIER MOUNTS IS NOT RESPONSIBLE FOR DEFECTS, MISUSE, OR IMPROPER HANDLING OF THE
LED CABINETS.
Tools for Installation:
00.0 o
Spool of
colored strings
Anti-Static
Gloves
LASER
Installation Guide
TVF -
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100 Page 3
The overall dimensions of any video wall array can be
calculated by using the table within this page.
The desired array size is a combination of available sizes.
Add the available sizes together to nd the overall width or
height of a given array.
For modular conguration, any combination of the rails
does not affect the overall dimension of the mount.
For example: 4X4 array would be 95.21” x 53.51” but larger
array i.e., 8X8 would consist of four sets of the 4X4 mounts
for an overall of 190.42” x 107.02”.
DETERMINE THE OVERALL VIDEO WALL DIMENSION
Available
Size
Imperial
(Inches)
Metric
(Milimeters)
X
2 Wide 47.60 1209.5
3 Wide 71.41 1813.7
4 Wide 95.21 2415.4
Y
1 High 13.34 338.8
2 High 26.73 679.0
3 High 40.12 1019.1
4 High 53.51 1359.2
5 High 66.90 1699.3
6 High 80.29 2039.4
X
Y
AFF
LASER
LEVEL
Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
Page 4
AVAILABLE
SIZES
2 WIDE
2 HIGH1 HIGH 3 HIGH 4 HIGH 5 HIGH 6 HIGH
3 WIDE
4 WIDE
4 4000-106-111-LX Vertical Rail 1V
5 4000-106-122-LX Vertical Rail 2V
6 4000-106-123-LX Vertical Rail 3V
7 4000-106-124-LX Vertical Rail 4V
8 4000-106-125-LX Vertical Rail 5V
9 4000-106-126-LX Vertical Rail 6V
ITEM #. PART NO. DESCRIPTION
1 4000-106-112-LX Horizontal Rail 2H
2 4000-106-113-LX Horizontal Rail 3H
3 4000-106-114-LX Horizontal Rail 4H
3
8
7
6
9
2
1
5
4
Installation Guide
TVF -
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
1
2
Page 5
Vertical
Rail
Horizontal
Rail
M5 x 8mm
Flat Head
1. Install the Vertical and Horizontal Rails together using (4) M5x 8mm Flat Head Screw per.
2. Install 5/8”-11 Bolt with Hole onto each threaded extrusion for ease of installation in sequential step.
5/8”-11 Bolt
With Hole
1. Determine the desired location by calculating the height of the pre-mounting hang location using
the table on page 3.
2. Use any commercially available hardware to temporary hang the mount.
Support Screws
METHOD 1
Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
3
Page 6
1. Place a level on top of the mount and reinstall or adjust the support screws if necessary.
2. Secure the rst mounting location by sliding a Wall Anchor Plate behind the mount and fasten
using 5/16” x 3 Hex Lag and 5/16” Washer.
3. Maintain a 1/8” minimum gap from the anchor plate and the rail when anchoring.
4. Install the remaining mounting locations while keeping the mount leveled.
LASER / LEVEL
Support
Screw
Edge of
the rail
00.0 o
5/16” x 3”
Hex Lag
5/16 Washer
5/8”-11 Bolt
With Hole
Wall Anchor
Plate
Horizontal
Rail
1/8” min.
gap
Clearance
3” (76.2mm)
Pre-Mounting
Hang Location
Installation Guide
TVF -
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
1
Page 7
00.0 o
LASER / LEVEL
Wall Anchor Plate Wall Anchor Plate
WALL WALL
1. Install (2) 5/8”-11 Bolt with Hole onto the threaded extrusion.
2. Place the rst Horizontal Rail on the wall.
3. Secure the rst mounting location by sliding a Wall Anchor Plate behind the mount and fasten
using 5/16” x 3 Hex Lag and 5/16” Washer.
4. Maintain a 1/8” minimum gap from the anchor plate and the rail when anchoring.
5. Level, Square, Plumb.
6. Install the remaining lag bolts, washers, and wall anchor plate.
METHOD 2
1/8” min.
gap
Clearance
5/16” x 3”
Hex Lag
5/16 Washer
5/8”-11 Bolt
With Hole
Wall Anchor
Plate
Horizontal
Rail
Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
2
3
Page 8
Vertical
Rail
Horizontal Rail
(Mounted)
1. Securely fasten each Vertical Rail onto a mounted Horizontal Rail using (2) M5 x 8mm Flat
Head Screw per end.
2. Fasten the Lower Horizontal Rail but do not anchor until the mount is perfectly square. See
sequential step.
ASSEMBLE THE LOWER SECTION OF THE MOUNT
Lower
Horizontal
Rail
Vertical Rail
(End)
M5 x 8mm
Flat Head
Support
Screws
Install a few support screws (commercially available hardware) to temporary hold the lower
section in place prior to final mounting location.
Do Not Anchor Prior to
Final Mounting Location
Installation is not finished within this step. After leveling the vertical brackets,
secure the bottom horizontal to the wall. See step 8 for additional detail.
Installation Guide
TVF -
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
4
Page 9
Multiple Unit Conguration
1. Position the second Horizontal Rail side by side.
2. Place a support screw while maintaining a leveled horizontal
rail to temporary hold in place.
3. Attach the Spacer Bracket and fasten using (8) M5 x 8mm
Flat Head Screw per.
4. Place Vertical Rail (end) at a shifted position shown on top
and securely fasten using (4) M5 X 8mm Flat Head Screw.
5. Install the lower section of the mount as the steps above.
To extend the width of the unit, follow the steps below.
Extend Horizontally
SHIFTED
Vertical Rail
(end)
the seems between
two units
M5 x 8mm Flat
Head
Horizontal Rail
(1st unit)
Horizontal Rail
(2nd unit) LASER / LEVEL
Support
Screw
Spacer Bracket
00.0 o
Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | International +1-714-632-7100
5
Page 10
Extend Vertically
Multiple Unit Conguration
1. Position multiple units adjust to each other.
2. Joint the units together using multiple Spacer Brackets and fasten using
(8) M5 x 8mm Flat Head Screw per.
To extend the height of the unit, follow the steps below.
To extend
horizontally
To extend
horizontally
Spacer Brackets
Table of contents
Other Premier Mounts Rack & Stand manuals
Premier Mounts
Premier Mounts RTM-L User manual
Premier Mounts
Premier Mounts SVL Series User manual
Premier Mounts
Premier Mounts PSPK User manual
Premier Mounts
Premier Mounts UFA User manual
Premier Mounts
Premier Mounts AM50 User manual
Premier Mounts
Premier Mounts AM65 User manual
Premier Mounts
Premier Mounts PSD-TS User manual
Premier Mounts
Premier Mounts PP-FCTA User manual
Premier Mounts
Premier Mounts PSM-442T User manual
Premier Mounts
Premier Mounts SpiroLock SPI-PRO User manual
Premier Mounts
Premier Mounts PTDM2 User manual
Premier Mounts
Premier Mounts ECM-D70T User manual
Premier Mounts
Premier Mounts PP-HDFCP User manual
Premier Mounts
Premier Mounts PRF User manual
Premier Mounts
Premier Mounts AST-2446-2 User manual
Premier Mounts
Premier Mounts CTM-MS2 User manual
Premier Mounts
Premier Mounts PSP-DB User manual
Premier Mounts
Premier Mounts PDS-PLUS User manual
Premier Mounts
Premier Mounts RTM-L User manual
Premier Mounts
Premier Mounts PSD-SPA User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
