Panasonic KX-TCD430FXB User manual

ORDERNO. KM40402351C2

Telephone Equipment

KX-TCD430FXB / KX-TCD430FXC / KX-TCD430FXW / KX-

A143EXB / KX-A143EXC / KX-A143EXW

Digital Cordless Phone

Black Version

Dark Blue Version

White Version

(for NordicCountries)

SPECIFICATIONS

Unauthorized copying and distribution isaviolation of law.

1. ABOUT LEAD FREE SOLDER (PbF: Pb free)

Note:

Inthe information below, Pb, the symbol forleadinthe periodic table of elements, will referto

standardsolderorsolderthat contains lead.

We will use PbF solderwhendiscussing the leadfree solderusedinourmanufacturing process

whichis made fromTin(Sn), Silver(Ag), and Copper(Cu).

This model, and others like it, manufacturedusing leadfree solderwill have PbF stampedon

the PCB. Forservice and repairwork we suggest using the same type of solderalthough, with

some precautions, standardPbsoldercanalsobe used.

Caution

-PbF solder has amelting point that is50°F ~70°F (30°C~ 40°C)

higher than Pb solder. Please use asoldering iron with

temperature control and adjust itto 700°F ± 20°F (370°C± 10°C). In

case of using high temperature soldering iron, please be careful

not to heat too long.

-PbF solder will tend to splash ifitisheated much higher than its

melting point, approximately1100°F (600°C).

-Ifyou must use Pb solder on aPCB manufactured using PbF

solder, remove as much of the original PbF solder as possibleand

be sure that anyremaining ismelted prior to applying the Pb

solder.

-When applying PbF solder to doublelayered boards, please check

the component side for excess which mayflow onto the opposite

side (See the figure below).

1.1. Suggested PbF Solder

There are several types of PbF solderavailable commercially. While this product is

manufacturedusing Tin, Silver, and Copper

(Sn+Ag+Cu), you canalsouse Tinand Copper(Sn+Cu) orTin, Zinc, and Bismuth(Sn+Zn+Bi).

Please check the manufac

turer’s specific instructions forthe melting points of theirproducts and anyprecautions for

using theirproduct withother

materials.

The following leadfree (PbF) solderwire sizes are recommendedforservice of this product:

0.3mm, 0.6mm and 1.0mm.

1.2. How to recognize that Pb Free solder isused

1.2.1. Base Unit PCB

(Component View)

(FlowSolderSide View)

Note:

The location of the “PbF“ mark is subject tochange without notice.

1.2.2. Handset PCB

(Component View)

(FlowSolderSide View)

Note:

The location of the “PbF“ mark is subject tochange without notice.

1.2.3. ChargerUnit PCB

Note:

The location of the “PbF“ mark is subject tochange without notice.

2. FOR SERVICE TECHNICIANS

ICs and LSIs are vulnerable tostatic electricity.

Whenrepairing, the following precautions will helpprevent recurring malfunctions.

1. Cover the plasticparts boxes with aluminum foil.

2. Ground the soldering irons.

3. Use aconductive mat on the worktable.

4. Donot touch ICor LSI pins with bare fingers.

3. CAUTION

Dangerof explosion if batteryis incorrectlyreplaced. Replace onlywiththe same orequivalent

type recommendencedbythe manufacturer.

Dispose of usedbatteries according tothe manufacture’s Instructions.

4. BATTERY

4.1. BatteryInstallation

1. Insert the batteries negative (-) terminal first.

2. Close the batterycover.

Note:

-Use onlyrechargeableP03P (Ni-MH)/P03H(Ni-Cd) batteries.

4.2. BatteryCharge

Place the handset on the base unit forabout 7 hours before initial use.

Whenthe batteries are fullycharged, flashes. Whencharging, the batteryicon is

shownas follows.

Cleanthe charge contacts of the handset and base unit witha soft, drycloth, otherwise the

batteries maynot charge properly. Cleanif the unit is exposedtogrease, dust orhigh humidity.

If the handset is turnedoff, it will be turnedon automaticallywhenit is placedon the base unit.

Note forService:

The batterystrengthmaynot be indicatedcorrectlyif the batteryis disconnectedand connected

again, evenafterit is fullycharged.

Inthat case, byrecharging the batteryas mentionedabove, you will get a correct indication of

the batterystrength.

4.3. BatteryLife

AfteryourPanasonic batteries are fullycharged, you canexpect the following performance:

Note:

-The included batteries are Ni-MHbatteries.

-Batteryoperating time maybe shortened depending on usage

conditions and ambient temperature.

4.4. BatteryReplacement

If flashes evenwhenthe handset batteries have beenfullycharged, bothbatteries

must be replaced.

Important:

-Please use onlythe Panasonicbatteries P03P (Ni-MH)/P03H(Ni-Cd).

-Use onlyrechargeablebatteries. Ifyou install non-rechargeable

batteries and start charging, the batteries mayleak electrolyte.

-Donot mixoldand new batteries.

-Use only2nickel metal hydride (Ni-MH)batteries or 2nickel

cadmium (Ni-Cd) batteries. Donot mixbatterytypes.

-Ensure that the correct batterytype isselected.

1. Press the notch on the cover firmlyand slide itinthe direction of

the arrow.

2. Remove the batteries positive (+)terminal first. Replace both

batteries.

5. LOCATION OF CONTROLS

5.1. Base Unit

5.2. Handset

6. SETTINGS

General

-Donot connect the AC adaptor to anyAC outlet other than a

standard 220-240 VAC outlet.

-Thisproduct isunableto make callswhen:

-The portablehandset batteries need recharging or have failed.

-There isapower failure.

-The keylock feature isturned on.

-The call bar feature isturned on (onlynumbers stored as

emergencynumbers can be called).

-Donot open the base unitor handset (other than to change the

batteries).

-Thisproduct shouldnot be used near emergency/intensive care

medical equipment and shouldnot be used bypeoplewith

pacemakers.

-Care shouldbe taken that objects do not fall onto, and liquids are

not spilled into, the unit. Donot subject thisproduct to excessive

smoke, dust, mechanical vibration or shock.

Environment

-Donot use thisproduct near water.

-Thisproduct shouldbe kept awayfrom heat sources such as

radiators, cookers, etc. Itshouldalso not be placed inrooms

where the temperature isless than 5°Cor greater than 40°C.

-The AC adaptor isused as the maindisconnect device. Ensure that

the AC outlet islocated/installed near the unitand iseasily

accessible.

Location

Formaximumdistance and noise-free operation, place yourbase unit:

- Awayfromelectrical appliances suchas TVs, radios, personal computers orotherphones.

- Ina convenient, high and central location.

6.1. Connection

6.1.1. Base Unit

-Ifthe handset isnot charged, you cannot make or answer calls.

-Never install telephone wiring during alightning storm.

-The AC adaptor must remainconnected at all times. (Itisnormal

for the adaptor to feel warm during use.)

-Use onlythe AC adaptor PQLV19CEZ.

6.1.2. ChargerUnit

-The AC adaptor must remainconnected at all times (Itisnormal for

the adaptor to feel warm during use).

-Use onlythe AC adaptor PQLV200CEZ.

6.2. Ringer Volume

6.2.1. Base Unit

This manual suits for next models

Other Panasonic Cordless Telephone manuals

Panasonic

Panasonic KX-TGD310BX User manual

Panasonic

Panasonic KX-TD7895 - Digital Spread Spedtrum... User manual

Panasonic

Panasonic KX-T7885 - Battery For User manual

Panasonic

Panasonic KX-TH1211B User manual

Panasonic

Panasonic KX-TG5621 User manual

Panasonic

Panasonic KX-TG2712 User manual

Panasonic

Panasonic KX-TC2000NZB User manual

Panasonic

Panasonic KX-TG2711E User manual

Panasonic

Panasonic 2LINE KX-TH112 User manual

Panasonic

Panasonic KX-TG4011N User manual

Panasonic

Panasonic KX-TCD450NZ User manual

Panasonic

Panasonic KX-TG6451BX User manual

Panasonic

Panasonic KX-TG5621C User manual

Panasonic

Panasonic KX-TGF675 User manual

Panasonic

Panasonic KX-TC1205RUB User manual

Panasonic

Panasonic KX-TCD700NL User manual

Panasonic

Panasonic KX-TG6511RUB User manual

Panasonic

Panasonic KX-TGA101 Instruction Manual

Panasonic

Panasonic EASA-PHONE KX-T3000BA User manual

Panasonic

Panasonic KX-TC197B User manual

Panasonic

Panasonic KX-TG2611C User manual

Panasonic

Panasonic KXTGC212FX User manual

Panasonic

Panasonic KX-TGF320UE User manual

Panasonic

Panasonic KX-TG1311FX User manual

Popular Cordless Telephone manuals by other brands

3Com

3Com NBX Guide

BT FREESTYLE 3200 user guide

AT&T

AT&T CL84102 user manual

BREZZICNI

BREZZICNI CL-3622 user manual

Furuno

Furuno FM-4721 Brochure & specs

Sanyo

Sanyo CLT-J70 instruction manual

Amplicomms

Amplicomms BigTel 201 user manual

GE 26992 user guide

AT&T

AT&T E1812B user manual

Sanyo

Sanyo CLT-670 instruction manual

GE 15432970 user guide

Curtis

Curtis TC595 owner's manual

Gigaset

Gigaset Gigaset 3000 Micro operating instructions

Poly

Poly VVX D230 Quick start user guide

AT&T

AT&T 7625 user manual

GE 27930 user guide

Radio Shack

Radio Shack 43-3557 owner's manual

Uniden

Uniden D1785 Series user guide