Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode... User manual

MetroSelect®

Single-Line Scanner

Configuration Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in

specifications and other information contained in this document without prior

notice, and the reader should in all cases consult HII to determine whether any

such changes have been made. The information in this publication does not

represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein: nor for incidental or consequential damages resulting from the

furnishing, performance, or use of this manual.

This document contains propriety information that is protected by copyright.

or translated into another language without the prior written consent of HII.

Web Address: www.honeywellaidc.com

Trademarks

Omniplanar, MetroSet2, Metrologic, MetroSelect, RangeGate, CodeGate,

CodeSelect, Voyager, VoyagerCG, VoyagerBT and Focus are trademarks or

registered trademarks of Metrologic Instruments, Inc. or Honeywell

International Inc.

Microsoft and Windows are trademarks or registered trademarks of Microsoft

Corporation.

IBM is a trademark of International Business Machines Corporation.

The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of

such marks by Honeywell International Inc. is under license.

Other product names mentioned in this manual may be trademarks or

registered trademarks of their respective companies and are the property of

their respective owners.

iii

Table of Contents

Introduction

Bar Code Configuration Methods.............................................................. 1–1

Single-Code Method.............................................................................. 1–1

Multi-Code Method ................................................................................ 1–1

Need to Start Over?.................................................................................. 1–2

Code Types and Decode Rules

UPC/EAN.................................................................................................. 2–1

Code 128 .................................................................................................. 2–2

Code 39 .................................................................................................... 2–2

2 of 5 Codes ............................................................................................. 2–4

Codabar.................................................................................................... 2–6

Code 93 .................................................................................................... 2–6

Code 11 .................................................................................................... 2–6

Telepen..................................................................................................... 2–7

Plessey Codes.......................................................................................... 2–7

Additional Decode Features...................................................................... 2–8

Configurable Code Lengths ...................................................................... 2–9

Supplements .................................................................................... 3–1

GS1 Databar ..................................................................................... 4–1

GS1 Databar Limited ................................................................................ 4–2

GS1 Databar Expanded............................................................................ 4–2

ISBT Code 128 Implementation

Configuration Mode .................................................................................. 5–1

Concatenation Configuration Mode .......................................................... 5–2

Pre-Defined Concatenation Configuration Mode ...................................... 5–2

User-Defined Concatenation Configuration Mode .................................... 5–3

Communications.............................................................................. 6–1

Scanner Operation

Configuration Mode Options......................................................................7–1

Scan Buffers..............................................................................................7–1

Redundant Scans......................................................................................7–2

Miscellaneous Decode Features ...............................................................7–2

Same Symbol Timeouts ............................................................................7–3

LED Options..............................................................................................7–3

Beeper Options .........................................................................................7–4

Data Transmission Delays.........................................................................7–6

Communication Timeout Options ..............................................................7–7

Host Scanner Commands .........................................................................7–8

Test Modes..............................................................................................7–10

Prefixes/Suffixes

User Configurable Prefixes, All Data .........................................................8–1

User Configurable ID Characters, Code Specific ......................................8–2

Standard Prefix Characters .......................................................................8–4

Standard Suffix Characters .......................................................................8–6

Longitudinal Redundancy Check...............................................................8–7

Block Check Character..............................................................................8–7

Character Replacements...........................................................................8–8

User Configurable Suffixes, All Data .........................................................8–9

Special Formats ......................................................................................8–10

Code Formatting

UPC/EAN Formatting ................................................................................9–1

Codabar Formatting ..................................................................................9–3

Code 39 Formatting...................................................................................9–4

Code 11 Formatting...................................................................................9–4

Telepen .....................................................................................................9–4

Plessey......................................................................................................9–5

2 of 5 Code Formatting..............................................................................9–5

RS232

Parity Features ....................................................................................... 10–1

Baud Rate............................................................................................... 10–1

Data/Stop Bits......................................................................................... 10–2

Hardware Handshaking .......................................................................... 10–2

Software Handshaking............................................................................ 10–4

Miscellaneous......................................................................................... 10–5

Keyboard

Enable Keyboard Emulation ................................................................... 11–1

Country/Scan Code Table Selects.......................................................... 11–1

Keyboard/System Type........................................................................... 11–2

’Dumb’ Terminal Selections .................................................................... 11–3

Special Keyboard Features..................................................................... 11–4

InterScan Code Delays........................................................................... 11–6

Control Sets............................................................................................ 11–7

OCIA ................................................................................................ 12–1

Light Pen Parameters ....................................................................13–1

Set Narrow Element Width...................................................................... 13–2

RS485 Configuration

IBM Port.................................................................................................. 14–1

IBM Reserve Codes................................................................................ 14–1

USB.................................................................................................. 15–1

Code Bytes Usage

Code Bytes 0-9 ....................................................................................... 16–1

Reserved Codes ..................................................................................... 16–2

Code Type Table .................................................................................... 16–2

ASCII Reference Table........................................................................... 16–3

Extended Key Code Reference Table..................................................... 16–7

MS9520 Voyager®and MS9540 VoyagerCG®Series

Activation Range .....................................................................................17–1

Stand Scan Modes..................................................................................17–1

CodeGate® Status ..................................................................................17–1

Laser/Scan Modes ..................................................................................17–2

Same Symbol Time Outs.........................................................................17–3

MS9520/9540-00 Laser Emulation Mode ................................................17–4

MS9524 and MS9544 VoyagerPDF®Series

PDF CodeGate Status.............................................................................18–1

MicroPDF and Composite Code Handling...............................................18–1

MS9535 VoyagerBT .......................................................................19–1

MS9535-5M VoyagerBT..................................................................20–1

Inventory Quantity Bar Codes .................................................................20–3

IS4125 and IS4225 Scan Engines .................................................21–1

IS4823 and IS4825 Scan Engines .................................................22–1

Operating Modes.....................................................................................22–1

Miscellaneous Features

Custom Defaults......................................................................................23–1

Serial Program Mode ..............................................................................23–2

Customer Support..........................................................................24–1

Technical Assistance...............................................................................24–1

Product Service and Repair.....................................................................24–2

1–1

Introduction

Your new scanner has been factory configured with a set of default

parameters. Since many host systems have unique formats and protocol

requirements, Honeywell provides a wide range of configurable features

that may be selected using this bar code based configuration tool. Once the

configuration is completed, the scanner stores the settings in nonvolatile

memory (NOVRAM). NOVRAM saves the settings when the power is off.

Note: Bar code descriptions marked with an asterisk ( * ) define a feature that

is a factory default. Bar codes marked with a tilde ( ~ ) require the

Multi-Code configuration method.

Bar Code Configuration Methods

The MetroSelect class of scanners can be bar code configured in two ways:

the Single-Code Method and the Multi-Code Method.

Note: To properly configure an MS9540 scanner, all configuration

codes must be scanned using the CodeGate®option.

Single-Code Method

Most features can be enabled or disabled using the Single-Code Method.

1. Power-up the scanner.

2. Scan the bar code for the desired feature.

3. The scanner will emit a multi-toned beep to indicate the configuration

has been saved to NOVRAM.

Multi-Code Method

All features can be enabled or disabled using the Multi-Code Method.

A feature marked with a tilde ( ~ ) requires the Multi-Code Method.

1. Power-up the scanner.

2. Scan the enter/exit configuration mode bar code (3 beeps).

3. Scan the bar code for the desired feature (1 beep). Multiple features

can be enabled/disabled before scanning the enter/exit configuration

mode bar code.

4. Scan the enter/exit configuration mode bar code (3 beeps) and save

the new configuration. To abort a configuration change, power off the

scanner before scanning the enter/exit code.

Enter/Exit Configuration Mode

³ 9 9 9 9 9 9

1–2

Need To Start Over?

Scan the Recall Defaultsbar code to erase all previous settings and return

the scanner to its factory default communication protocol. Keyboard Wedge

interface scanners will load keyboard wedge defaults. All other scanners load

RS232 defaults.

Note: Honeywell manufactures several products for OEM applications.

These OEM products are configured with custom OEM defaults, which

may use a different set of defaults than the standard set of factory

defaults. See page 23–1 for additional information on custom defaults

and how they affect factory defaults.

Recall Defaults

³ 9 9 9 9 9 8

2–1

Code Types and Decode Rules

Bar code descriptions marked with an asterisk ( * ) define a feature that is a

factory default. Bar codes marked with a tilde ( ~ ) require the Multi-Code

configuration method.

UPC/EAN

³ 1 0 0 1 1 6

* Enable UPC/EAN

³ 1 0 0 1 0 6

Disable UPC/EAN

³ 1 0 0 2 1 6

* Enable UPC-A

³ 1 0 0 2 0 6

Disable UPC-A

³ 1 0 0 2 1 0

* Enable UPC-E

³ 1 0 0 2 0 0

Disable UPC-E

³ 1 0 0 2 1 1

* Enable EAN-13

³ 1 0 0 2 0 1

Disable EAN-13

³ 1 0 0 2 1 4

* Enable EAN-8

³ 1 0 0 2 0 4

Disable EAN-8

2–2

Code 128

³ 1 0 0 1 1 3

* Enable Code 128

³ 1 0 0 1 0 3

Disable Code 128

³ 1 0 0 3 1 4

Enable UCC/EAN-128 ‘]C1’ Code Formatting –

For Coupon Code 128, see page 3–3.

³ 1 0 0 3 0 4

* Disable UCC/EAN-128 ‘]C1’ Code Formatting

³ 1 0 0 7 1 1

Ignore <FNC4> Code 128 Characters

³ 1 0 0 7 0 1

* Use <FNC4> to Determine Extended ASCII

Characters

Code 39

³ 1 0 0 1 1 1

* Enable Code 39

³ 1 0 0 1 0 1

Disable Code 39

³ 1 0 0 2 1 3

Enable MOD 43 Check Digit on Code 39 –The

scanner only scans Code 39 bar codes that have

a valid Modulo 43 check digit.

³ 1 0 0 2 0 3

* Disable MOD 43 Check Digit on Code 39

³ 1 0 0 2 1 7

Enable Full ASCII Code 39

³ 1 0 0 2 0 7

* Disable Full ASCII Code 39

This manual suits for next models

Table of contents

Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode... User manual

Popular Barcode Reader manuals by other brands