Gima ABPM PULSE RATE MONITOR WITH BLUETOOTH User manual
GIMA ABPM PULSE RATE MONITOR
WITH BLUETOOTH
M-35112-EN-Rev.2.07.16
0123
PROFESSIONAL MEDICAL PRODUCTS
Gima S.p.A. - Via Marconi, 1 - 20060 Gessate (MI) Italy
Italia: tel. 199 400 401 - fax 199 400 403
Export: tel. +39 02 953854209/221/225 - fax +39 02 95380056
gima@gimaitaly.com - export@gimaitaly.com
www.gimaitaly.com
User Manual
ATTENTION: The operators must carefully read and completely understand
the present manual before using the product.
CONTEC MEDICAL SYSTEMS CO., LTD
No.112 Qinhuang West Street, Economic & Technical
Development Zone, Qinhuangdao, Hebei Province,
PEOPLE’S REPUBLIC OF CHINA
Shanghai International Holding Corp. GmbH (Europe)
Eiestrasse 80, 20537 Hamburg, Germany
2
3
Chapter 1 INTRODUCTION................................................................. 5
1.1 General Information ............................................................ 6
1.2 Button Functions ................................................................ 8
1.3 Interfaces ............................................................................ 8
1.4 Accessories ........................................................................ 9
Chapter 2 GETTING STARTED ......................................................... 10
2.1 Open the Package and Check.......................................... 10
2.2 Dry battery installation...................................................... 10
2.3 Power on the instrument................................................... 10
2.4 Connect Sensor................................................................ 11
Chapter 3 Function Interface............................................................ 11
3.1 Main Interface ................................................................... 11
3.2 Measuring Interface .......................................................... 12
3.3 Measure Result Interface.................................................. 13
3.4 System Menu.................................................................... 14
3.5 ABPM Working Interface................................................... 23
Chapter 4 NIBP MEASURING........................................................... 25
4.1 Introduction....................................................................... 25
4.2 NIBP Measuring................................................................ 25
4.3 Operation Hints................................................................. 27
4.4 NIBP Error Message and Explanations............................. 29
4.5 Maintenance and Cleaning ............................................... 29
4.6 Transportation and Storage .............................................. 30
4.7 Key And Symbols ............................................................. 31
Chapter 5 INSTALLATION OF THE SOFTWARE .............................. 31
5.1 Demand of editor.............................................................. 31
5.2 Installation of software...................................................... 32
Chapter 6 INTRODUCTION TO THE SOFTWARE ............................ 32
6.1 Main Interface................................................................... 32
6.2 Wear ................................................................................. 33
6.3 Set File Path ..................................................................... 33
6.4 Set Collection Project....................................................... 34
6.5 Download Data................................................................. 36
6.6 Select the Case to be Edited............................................ 36
INDEX
4
6.7 Delete Case ...................................................................... 37
6.8 Copy Case........................................................................ 38
6.9 Edit BP Data ..................................................................... 39
6.10 Edit Trend Graph .............................................................. 40
6.11 Edit of Diagnose Information............................................ 42
6.12 Set BP Thresholds............................................................ 43
6.13 Histogram......................................................................... 44
6.14 Pie Chart........................................................................... 44
6.15 Set Print Report................................................................ 45
6.16 Print Report Preview......................................................... 46
6.17 Help .................................................................................. 48
6.18 Exit.................................................................................... 48
Chapter 7 TROUBLESHOOTING GUIDE.......................................... 49
SPECIFICATION..................................................................................... 50
APPENDIX .......................................................................................... 51
5
Chapter 1
INTRODUCTION
For an overall introduction to the Blood Pressure Monitor, please
refer to General Information.
For basic operating instructions, please refer to Button Function.
For allocation of interface sockets, please refer to Interfaces.
Warning
Possible explosion hazard if used in the presence of ammable
anesthetics or other ammable substance in combination with air,
oxygen-enriched environments, or nitrous oxide.
Warning
You must verify if the device and accessories can work safely
and normally before using.
Warning
Ensure that the environment in which the device is operated is not
subject to any sources of strong electromagnetic interference, such
as radio transmitters, mobile telephones, etc. Keep them far away high
level electromagnetic radiation emitted from such devices may greatly
affect the instrument performance.
Warning
Dispose of the packaging material, observing the applicable waste
control regulations and keeping it out of children’s reach.
Warning
Please choose the accessories which are approved or manufactured
by the manufacturer, or else it may damage the device.
Warning
The monitor is only for use on one patient at a time.
Warning
When the monitor is wetted, please stop using it and contact us.
Warning
If Luer lock connectors are used in the construction of tubing,
there is a possibility that they might be inadvertently connected
to intravascular uid systems, allowing air to be pumped into
a blood vessel.
6
Warning
When used with Electro-surgery equipment, you must give top priority
to the patient safety.
Warning
It is recommended that you check if there is any damage on the monitor
or the accessories regularly, if you nd any damage, stop using it,
and contact the biomedical engineer of the hospital or our Customer
Service immediately. In addition, the overall check of monitor, including
the safety check such as the leakage current, should be only performed
by qualied personnel once every 12 months.
Note
Please choose the computer which should be ensured compliance
with the requirements of IEC 60950, or else it may damage the device.
Note
The software was developed per IEC60601-1-4. The possibility
of hazards arising from errors in the software program is minimized.
Note
The monitor shall comply with the standard EN1060 series:
Part 1: General requirements;
Part 3: Supplementary requirements for electro-mechanical blood
pressure measuring systems (in course of preparation).
Caution
At the end of its service life, the product described in this manual,
as well as its accessories, must be disposed of in compliance with
the guidelines regulation the disposal of such products. If you have
questions concerning disposal of the product, please contact us
or its representatives.
1.1 General Information
Environment:
Temperature Working 5~40 (˚C)
Transport and Storage -20~55 (˚C)
Humidity Working 15%~80%
Transport and Storage ≤ 95 %
Altitude 700hPa~1060hPa
Power Supply 3 (V) DC
P≤3.0VA
7
The device has life for 10000 times of BP measure(within 5 years).
Safety:
This device is debrillator protected. Note that no precautions
specic to the device is required during debrillation, and debrillation
discharge has no effect on the monitor. The equipment uses
the gray silicone airway, in case of the effect to the equipment
when debrillation device was used on the patient.
General instruction
The device is applied to Blood Pressure(BP) measure and monitor for adult,
pediatric, and neonatal. It most stores 300 records of common user and
350 of ambulatory Blood Pressure data. Every record includes the detailed
measure time, systolic blood pressure, diastolic blood pressure, mean blood
pressure, pulse rate, error message and record number, etc.
This device has friendly operation interface, and adopts 2.4inch color LCD.
It integrates data review function and display function which includes
large-print single record data review, data list, BP data trends chart,
the current time,date,power,alarm and so on.
User can power on/off the monitor,start manual measure, set system
parameters and so on with ve keys in the front panel. (Please refer
to “Button Functions” part for detail).
There are sound and light alarm functions that the buzzer intermittently
beeping and the red light ashing to prompt low power. When the measure
result exceed the alarm limit, the color of the measure results style
becomes red and aroses sound alarm. The user can turn on or off the alarm
sound if necessary.
The cuff socket is located on the top of the device and the USB socket
at the bottom of the device. The stored data can be transferred to computer
with the USB interface, and then various operations can be performed
by using the PC software. (Please refer to “Software Functions” part for
detailed contents).
Note
If there is no operation in the common user mode, the device will turn
off backlight according to the “BACKLIGHT TIME” you set, and if
no action for two minutes, the device will automatically turn off.
When the backlight turn off in the Ambulatory Blood Pressure mode,
the blue indicator intermittently ashes to prompt the device
in running state.
8
1.2 Button Functions
All the operations of the Blood Pressure Monitor could be completed
with the buttons. The names of button are on them. They are:
Press the button for a long time, then the system will start. When
turning on and off the monitor, the red light and the blue both ash
once to prompt that the on or off operation is successful. Press it for
a short time to return the boot-strap interface.
The text in the middle bottom of the screen indicate the function
of this key. Whatever menus the system is in, press the button
and the system immediately executes a certain function.
The text in the left bottom of the screen indicate the function of this
key.
Such as: The button is the alarm switch in the boot-strap interface,
up key in the “System Menu”, and left key in the “trend “chart.
The text in the right bottom of the screen indicate the function of this
key.
Such as: the button is the data review key of current user in the
boot-strap interface and down key in the “System Menu” and right
key in the “trend” chart.
Start/Stop button. If measuring, press this key to cancel the current
measurement
Note
During uploading data with the USB, all of the buttons are disabled.
If measuring, the measurement is to be canceled..
Note
During measurement, three buttons are all disabled.
The rectangular mark in the screen moving with the operation of ,
buttons is called “cursor”. Operation can be performed in any
position at which the cursor can stay. When the item is not selected,
the cursor is yellow; when selected, the cursor becomes red.
1.3 Interfaces
For the convenience of operation, different kinds of interfaces are in different
parts of the instrument. NIBP cuff socket is at the top.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
9
Note
Cuff is connected to the monitor through the extended gas pipe.
1Port of extended gas pipe
2The socket for Gas pipe
At the bottom is the socket for USB
1 the Socket for USB, connect the data line to upload data
1.4 Accessories
1A cuff for adult
2A USB data line
3A disk (PC software)
4BP extending tube
5A pouch
Warning
Please use the special accessories supplied by the manufacturer
or replace the accessories according to the requirements
of the manufacturer in order to avoid making harms to patients.
1
2
Figure 1
The top external airway
Figure 2
Bottom
1
10
Chapter 2
GETTING STARTED
• Open the package and check
• Dry battery installation
• Power on the instrument
• Connect patient sensors
2.1 Open the Package and Check
Open the package and take out the equipment and accessories carefully.
Keep the package material for possible future transportation or storage.
Check the components according to the packing list.
• Check for any mechanical damage.
• Check all the cables, modules and accessories.
If there is any problem, contact the distributor immediately.
2.2 Dry battery installation
The instrument will be supplied with two ‘AA’ alkaline batteries or high
capacity. Before using the instrument, you shall put the battery in the battery
box in the back of the monitor.
Note
When you don’t use the equipment, you should take out the dry
battery.
2.3 Power on the instrument
Press button to power on the instrument. The indicators will ash once,
which shows the boot-strap is success, then end pressing, the system will
enter into the main interface.
Warning
If any sign of damage is detected, or the instrument displays some
error messages, do not use it on any patient. Contact biomedical
engineer in the hospital or our Customer Service Center immediately.
Note
Check all the functions that possibly be used and make sure that the
equipment is in good status.
OK
Table of contents
Other Gima Heart Rate Monitor manuals
