EZee Life CH4060 User manual
Model: CH104
Model: CH4060
EZee Life™ Products
34 Futurity Gate, Unit 15
Concord, Ontario L4K 1S6
EZee Fold HD Portable
Power Wheelchair
...............................................
Table of Contents
2
Guidance For Use 3
Product Safety Symbols 4
Technical Specifications 5
Features 6
Electromagnetic Interference Warning 7
Safety 8
Installation Guide 13
Operation Guide 14
Braking 17
Battery 18
Unfolding And Folding 22
Troubleshooting 26
Warranty 28
Packing List 30
Guidance for Use
This manual must be read and understood completely before your first use.
If you have difficulty in understanding the warnings, notes and instructions
in this owner’s manual,or require additional assistance, please contact your
authorized provider or distributor to obtain professional guidance and help.
Failure to follow the instructions on this manual can lead to your safety
being at risk as result of improper usage, and voiding the warranty.
Authorized Provider: __________________________________
Address: ___________________________________________
Phone Number: ______________________________________
Purchase Date: ______________________________________
3
Product Safety Symbols
The following symbols are used to identify warnings, mandatory actions and
prohibited actions. It is essential that you fully understand and completely
familiarize yourself with these symbols before operating wheelchair for the first
time.
Read and follow the instructions provided in this manual.
Safety warning sign or an indication of a dangerous operation that may
endanger your safety or the safety of others.
Class Ⅰ equipment (Canada) / Class Ⅱ equipment (USA).
Do not use any mobile phones, walkie talkies, electronic devices or any
other radio transmitters while operating.
Finger crush / pinch point.
Store in a clean and dry condition; away from rain, snow, ice, salt and
water.
Test of EMI/RFI at an immunity level of 30 V/m has been passed.
Corrosive substance contained in the battery
Danger of explosion
Do not use batteries with different amp-hour (Ah) capacities, No
mix use of old and new batteries. Always replace both batteries
at the same time.
Keep tools and other metal objects away from battery terminals. If
contacted, shortcircuit or electric shock may occur and cause injury.
Flammable material, avoid exposure to heat source such as open flame
or sparks. Avoid transporting the batteries along with flammable or
combustible objects.
Disposal and recycle
4
Technical Specifications
*Will vary with user’s weight, terrain, ground condition, battery condition,
temperature and driving style.
5
Dimensions (Unfolded):
Dimensions (folded):
Suggested User Weight Max: 180kgs (390 lbs)
Gross weight: 28 kg (with 3 battery )/25 kg (with 1 battery)
Full Charge Range: 12 km* per battery
Max Speed: 6 km/h
Turning radius: 31.5 in / 800 mm
918 x 603 x 892 mm (36.1” x 23.7” x 35.1”)
668 x 603 x 324 mm (26.3” x 23.7” x 12.8”)
Motor Type Brushless DC Motor
Rated power 250 W
Input Voltage DC 24V
Brake System Intelligent Electromagnetic Brake
Braking Distance 0.5m (at max speed)
Battery Type Li-ion battery
Battery Capacity 7.8 Ah
Output Voltage DC 24V
Controller Type Brushless dual-drive rocker controller
Input Power 250W x 2
Input Voltage/Current DC 24V/12A x 2
Front Caster 7” Pnematic Tire
Rear Wheel 12” Solid Tire
Features
1. Footrest
2. Frame
3. Seat cushion
4. Armrest
5. Backrest cushion
6. Upper backrest
7. Control panel
. Frame connector block
9. Fender
10. Rear wheel
11. Front caster
12. Electromagnetic brake lever
13. Battery
14. Folding release lever
6
Electromagnetic Interference Warning
The power wheelchair may be affected by electromagnetic interference
(EMI), which may cause damage or interruption to the operation of the
chair. It is important for you to understand the instructions which can help
you take protective measures against the risk of interference.
The sources of electromagnetic waves come from broadcasting stations, TV
stations, radio transmitters, two-way radios (such as walkie-talkies), cellular
phones and computers. Interference from these electromagnetic waves
may cause malfunction or permanent damage to the chair’s braking and
control system.
CAUTI N!
1. The power wheelchair has passed the 30 V/m EMI test and has a certain
degree of immunity to most common electromagnetic energy sources.
However, it is important for you to follow the safety guidelines as follows:
a. Do not turn on or operate portable transceivers, receivers, radios or
any wireless communication devices.
b. Stay away from all radio wave emission sources.
2. If interference does occur and causes unintended movement to the chair
in an uncontrolled manner, cut off the power immediately.
3. No modification of any form to the power wheelchair is allowed, including
adding or removing any parts.
7
Safety
Usage Safety Guidelines
● Check all electrical and control connections to ensure they are secured safely
and firmly.
● Check battery levels regularly and ensure the battery is charged immediately
when needed.
● Keep tools and any metal objects away from the negative and positive poles
of the battery.
● Short-circuits or electric shock may occur when the two poles are accidentally
contacted.
● Familiarize yourself with wheelchair and its capabilities.
● Always seek assistance during your first use until you are confident enough to
operate the chair independently and proficiently.
● Always beware of any potential danger while using the power wheelchair.
● When the power wheelchair is not in use, turn off the power, charge the
battery and store in a clean and dry place.
Joystick
To ensure your safety while operating the power wheelchair, the control panel
must be securely mounted (Fig. A1). If any buttons on the control panel fail or
are not responding, you must stop using the chair immediately and contact the
provider for repair or replacement.
A1
8
Static Position
When the chair is inactive even for a moment; the power must be off (Fig. A2).
This will:
● Prevent the control panel from being activated by accidental touch which may
cause the chair to move unintentionally.
● Prevent the chair from electromagnetic interference sources which may
activate the chair’s operation system and cause damage to the chair and bodily
harm.
Do not allow anyone but you to touch the control panel. This will protect the
chair from being moved without your awareness and causing potential serious
bodily harm.
A2
Weather Precautions
This power wheelchair shall not be used or stored in environments of rain,
snow, icy or slippery surfaces. These conditions may adversely affect the
functions of the chair. Always keep your chair in a clean and dry area.
Malfunction may occur if the device is in contact with rain, snow or high
humidity environments.Do not expose the chair to any extremely hot or cold
conditions. The chair is not fully waterproof; a humid environment may result in
rusting or corrosion inside the chair. If you are ever caught in any of these
conditions, please proceed to shelter immediately.
To prevent malfunction, please adhere to the guidelines as follows:
● Do not operate or store the chair in an environment which has direct water
contact extremely hot or cold temperature or high humidity.
● Do not use the chair while showering, swimming, etc.
● Do not use the chair in salt or fresh water.
● Do not use the chair around any water sources (e.g. rivers, lakes, etc.)
● Do not flush the chair with water.
9
Note: When the chair is wet, immediately pull out the battery and allow it to dry
naturally. Put the battery back after the chair is completely dried.
When operating on wet or frictionless ground surfaces, please carefully move at
a slow speed and follow the safety guidelines below:
● When any of the motor wheels losses traction, the chair must be stopped
immediately to avoid losing control of the chair (e.g. slipping, tipping
over, etc.).
● Do not drive into slopes or ramps covered with snow, ice, water, oil, etc.
Road Surfaces
This wheelchair is designed optimally for dry level surfaces; such as concrete
and indoor ground flooring.
Do not use wheelchair on sand, uneven or loose surfaces, tall grass or rough
road surfaces to prevent the wheels, bearings, axis, motor and other parts from
being damaged or loosened.
Vehicle Transport
Please be aware that it is at your own risk and is not advisable
to sit in the wheelchair when taking any forms of transportation
such as cars, buses, trains, planes or ships.
If you must take such forms of transportation while remaining in the chair, it is
extremely important that you secure your positioning waist belt and power off
the chair and push the brake lever to“Lock” position, inspect no movement to
the motor wheels and have the chair securely tied down.This will help prevent
injuries during sudden stops. However, as this chair is ultra-compact, taking any
transportation is made possible as you can fold the chair conveniently and can
be stored away in tight storage areas such as a car trunk. Please ensure the
chair is stored securely in order to avoid injury.
If you need to be transferred on or off a vehicle manually without getting off the
chair, never allow anyone to lift the chair by the armrest or rear backrest. The
chair must be lifted by firmly gripping the front and rear edges of the seat
cushion frame.
Weight Distribution
To avoid tipping over while driving, the balance and stability of the power
wheelchair must not be neglected. The following factors may affect the weight
distribution of the chair:
● Height and angle of the chair.
● Seating position, or weight loading position of the user’s body.
● The gradient of the ramp or slope.
● Load carried in storage basket or by the user may have adverse effects
to the weight distribution of the chair.
10
Other manuals for CH4060
1
Table of contents
