Erbe Bipolar LAP forceps (E) User manual

DISMANTLING AND ASSEMBLING

Bipolar LAP forceps (E) and bipolar LAP scissors (E)

Dismantling the product The product must be cleaned and disinfected in disassembled condition with jaws opened.

Caution: Never pull the jaws apart

manually, as this would cause damage

to the instrument.

1 Pull out the connecting cable from the

handle (no illustration).

2 Press both unlocking buttons (d) on the

handle simultaneously and remove the shaft

tube from the handle.

3 Screw the insert out of the shaft tube,

grasping it by the joint sleeve (e).

4 Withdraw the insert from the shaft tube.

5 To open the jaws, hold the insert by the

joint sleeve (e) and push the rod (b) in the

direction of the jaws.

Assembling the product

Caution: Never press the jaws together

manually, as this would cause damage to

the instrument.

1 To close the jaws, hold the insert by the

joint sleeve (e) and pull the rod (b).

2 Insert the insert (c) into the shaft tube (b). 3 Screw in the insert up to the stop position,

grasping it by the joint sleeve (e).

4 Press the rear unlocking button on the

handle (d) and insert the shaft tube into the

handle until it snaps into place at the stop

position.

The complete instrument

The three disassembled components:

a Handle, b Shaft tube and c Insert

d d ee b

c a

For the complete notes on use, refer to erbe-med.com

Erbe Elektromedizin GmbH

Waldhoernlestrasse 17

72072 Tuebingen

Germany

Phone +49 7071 755-0

Fax +49 7071 755-179

[email protected]

erbe-med.com

Inserts for bipolar LAP forceps (E) Pieces No.

Insert for LAP/E LAP forceps Maryland,

deep-ribbed, ø 5 mm, length 340 mm 120195-143

Insert for LAP/E LAP forceps,

fenestrated, deep-ribbed, ø 5 mm, length 340 mm 120195-14 4

Insert for bipolar LAP scissors (E) Pieces No.

Insert for bipolar LAP/E LAP scissors Metzenbaum,

ø 5 mm, length 340 mm 120195-242

Individual components for bipolar LAP forceps (E) and bipolar LAP scissors (E) Pieces No.

Shaft tube for bipolar LAP forceps and LAP scissors,

ø 5 mm, length 340 mm 120195-141

Handle for bipolar LAP forceps and LAP scissors 120195-140

Shaft tube for bipolar E LAP forceps and E LAP scissors,

ø 5 mm, length 340 mm 120195-241

Handle for bipolar E LAP forceps and E LAP scissors 120195-245

Accessories for bipolar LAP forceps (E) and bipolar LAP scissors (E) Pieces No.

Cleaning brush, length 650 mm,

for manual cleaning and disinfection 120191-279

Rinsing tube with Luer Lock connector, length 500 mm,

for cleaning and disinfection by machine 120195-201

DISMANTLING AND ASSEMBLING

BiClamp®LAP forceps and BiClamp®E LAP forceps

Dismantling the product The product must be cleaned and disinfected in disassembled condition with jaws opened.

Caution: Never pull the jaws apart

manually, as this would cause damage

to the instrument.

1 Press both unlocking buttons on the handle

(d) simultaneously and withdraw the shaft

tube from the handle.

2 Screw the insert out of the shaft tube,

grasping it by the joint sleeve (e).

3 Withdraw the insert from the shaft tube.

4 To open the jaws, hold the insert by the

joint sleeve (e) and push the rod (c) in the

direction of the jaws.

Assembling the product

Caution: Never press the jaws together

manually, as this would cause damage to

the instrument.

1 To close the jaws, hold the insert by the

joint sleeve (e) and pull the rod (b).

2 Insert the insert (c) into the shaft tube (b). 3 Screw in the insert up to the stop position,

grasping it by the joint sleeve (e).

4 Press the rear unlocking button on the

handle (d) and insert the shaft tube into the

handle until it snaps into place at the stop

position.

The complete instrument

The three disassembled components:

a Handle, b Shaft tube and c Insert

d d

ee b

e cb

For the complete notes on use, refer to erbe-med.com

Erbe Elektromedizin GmbH

Waldhoernlestrasse 17

72072 Tuebingen

Germany

Phone +49 7071 755-0

Fax +49 7071 755-179

[email protected]

erbe-med.com

Insert and individual components for BiClamp LAP Pieces No.

Insert for BiClamp 110, smooth, ø 5 mm, length 110 mm 120195-232

Shaft tube for BiClamp 110, ø 5 mm, length 110 mm 120195-234

Shaft tube for BiClamp LAP forceps 120195-141

Handle for BiClamp LAP forceps and BiClamp 110,

with connecting cable 4 m and MF plug 120195-145

Individual components for BiClamp E LAP Pieces No.

Shaft tube for BiClamp E LAP forceps,

ø 5 mm, length 340 mm 120195-241

Handle for BiClamp E LAP forceps,

with connecting cable 4 m and MF plug 120195-240

Inserts for BiClamp LAP and BiClamp E LAP Pieces No.

Insert for BiClamp LAP / E LAP forceps Kelly,

ø 5 mm, length 340 mm 120195-236

Insert for BiClamp LAP / E LAP forceps Maryland,

semi-deep ribbed, ø 5 mm, length 340 mm 120195-146

Insert for BiClamp LAP / E LAP forceps Maryland,

smooth, ø 5 mm, length 340 mm 120195-147

Insert for BiClamp LAP / E LAP forceps, fenestrated,

semi-deep, ø 5 mm, length 340 mm 120195-148

Insert for BiClamp LAP / E LAP forceps, fenestrated,

smooth, ø 5 mm, length 340 mm 120195-149

Reconditioning accessories for BiClamp LAP and BiClamp E LAP Pieces No.

Cleaning brush, length 650 mm,

for manual cleaning and disinfection 120191-279

Rinsing tube with Luer Lock connector, length 500 mm,

for cleaning and disinfection by machine 120195-201

DISMANTLING AND ASSEMBLING

LAP BiSect scissors

Dismantling the product The product must be cleaned and disinfected in disassembled condition with jaws opened.

1 Pull out the connecting cable

(no illustration).

2 Hold the handle (a) in such a way that the

moving handle is not obstructed. Press the

push-button and withdraw the shaft (c)

from the handle.

3 Hold the electrode by the insulation (b)

between your thumb and index nger.

Screw the electrode out of the shaft by

turning the rotary wheel (e) (approx. 6

turns).

4 Withdraw the electrode (d) from the shaft.

5 Pull the insulating tube (b) off the shaft.

Assembling the product

1 Push the insulating tube (b) onto the shaft

(c).

2 Insert the electrode (d) into the shaft up to

the stop position.

3 Hold the electrode by the insulation (b)

between your thumb and index nger.

Screw the electrode in, tightening it well,

by turning the rotary wheel (e) (approx. 6

turns); do not jam the thread.

4 Hold the handle (a) just like you would hold

a pen in such a way that the handles face

upwards and the moving handle is not ob-

structed, and press the push-button. Insert

the shaft into the handle (a) until it snaps

into place, without jamming it.

The complete instrument

The four disassembled components:

a Handle b Insulating tube c Shaft d Electrode

d b

For the complete notes on use, refer to erbe-med.com

Erbe Elektromedizin GmbH

Waldhoernlestrasse 17

72072 Tuebingen

Germany

Phone +49 7071 755-0

Fax +49 7071 755-179

[email protected]

erbe-med.com

Insert for LAP BiSect scissors Pieces No.

Insert for LAP BiSect Micro, ø 5 mm, length 350 mm 120195-206

Insert for LAP BiSect scissors Pieces No.

Insert for LAP BiSect Macro (20195-205), ø 5 mm,

length 350 mm 120195-207

Individual components for LAP BiSect Micro and Macro scissors Pieces No.

Shaft tube for LAP BiSect Micro and Macro,

ø 5 mm, length 350 mm 120195-208

Insulated tube for LAP BiSect Micro and Macro,

ø 5 mm, length 350 mm 120195-209

Handle for LAP BiSect Micro and Macro 120195-210

Reconditioning accessories for LAP BiSect Micro and Macro scissors Pieces No.

Cleaning brush, length 650 mm,

for manual cleaning and disinfection 120191-279

Rinsing tube with Luer Lock connector, length 500 mm,

for cleaning and disinfection by machine 120195-201

This manual suits for next models

Popular Medical Equipment manuals by other brands

TekTone

TekTone Tek-CARE160 Installation and operation manual

NeuroMetrix

NeuroMetrix Quell 2.0 user manual

AMT

AMT XLR8 Quick reference guide

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 instruction manual

EDAN

EDAN SONOTRAX Pro user manual

Restorative Therapies

Restorative Therapies RT300 Service guide

Gendex

Gendex Expert DC installation manual

Dexcowin

Dexcowin ADX4000W user manual

Libelium

Libelium MySignals user manual

Acelity

Acelity V.A.C.ULTA 4 user manual

Caputron

Caputron ActivaDose II tDCS quick start guide

FujiFilm

FujiFilm Sonart Features

Plinth 2000

Plinth 2000 93CDT Service manual

GE SENOGRAPHE 800T Operator's manual

GE Definium 5000 Operator's manual

Kanmed

Kanmed GE-1380 user manual

Huntleigh

Huntleigh FD1 Instructions for use

Stryker

Stryker SPR Plus Operation manual