2. Warning and safety information
2.1 Danger warnings
For safety reasons your machine MUST be bonded to adjacent
metalwork or earthed so that it is at the same potential (i.e.
voltage) (►4.1).
A means for disconnection that has an all pole seperation of
more than 3mm must be incorporated in the fixed wiring in
accordance with wiring rules (►4.2).
All mains electrical work must be carried out in accordance with
local and national regulations, and by a qualified electrician
(►5.2.1).
The machine MUST be disconnected from its power source
during cleaning, servicing or replacing parts (►8).
Ensure the base of the machine is never submerged or standing
in water when operating the machine (►8).
2.2 Warnings
The machine should only be operated at or within the voltage
specified on the rating plate (►3.1).
Old existing, defective or damaged water supply hoses are NOT
to be used when installing your machine (►4.3.1).
The installer and user are responsible for ensuring the installation
and operation of this machine are in accordance with this manual
and local and national regulations (►5).
DO NOT use electrical extension lead(s) to supply power to your
machine (►5.2.1).
Children should be supervised to ensure that they do not play
with, or operate the machine (►7).
Be aware: Wares may be hot when removed from machine
(►7.6).
Before cleaning the wash chamber, ensure all sharp items, such
as broken glass or other items which could cause injury are
removed carefully (►8.1).
DO NOT use cleaning agents that contain CHLORINE, BLEACH
or HYPOCHLORITE (►8.1).
Wear protective clothing, protective gloves and protective
