BREEZISM ALAMEDA BF9453L56SL User manual
2
Installation .....................................................................
Table of Contents ..........................................................2
Safety Information .........................................................2
Warranty .........................................................................3
Pre-installation .............................................................. 3
6
Assembly ....................................................................... 7
Table of Contents
12Operation
Care and Cleaning
14
Troubleshooting 16
FCC Statement 17
......................................................................
...........................................................
............................................................
Safety Information
To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before you
begin.
All wiring must be in accordance with the National Electrical
Code “ANSI/NFPA 70” and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 35
lbs (15.9 kg). Use only UL Listed outlet boxes marked
“Acceptable for Fan Support of 35 lbs. (15.9 kg) or less.”
Do not place objects in the path of the blades.
Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor
on one side of the outlet box and ungrounded conductor on
the other side of the outlet box.
All setscrews must be checked and retightened where
necessary before installation.
1.
2.
3.
4.
5.
6.
7.
READ AND SAVE THESE INSTRUCTIONS.
WARNING
:
To reduce the risk of personal injury, do not
To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring.
CAUTION:
To reduce the risk of personal injury,
use only the screws provided with the outlet box.
To avoid personal injury or damage to the fan
and other items, use caution when working around or
cleaning the fan.
bend the blade brackets when installing the brackets
balancing the blades, or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
To reduce the risk of fire, electric shock
or personal injury, mount to outlet box marked
“ acceptable for fan support of 35 lbs. (15.9Kg)
or less” and use screws provided with the outlet box.
The fan must be mounted with a minimum
of 7 ft (2.1 m) clearance from the trailing edge of the
blades to the floor.
Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WARNING:
To reduce the risk of electrical shock or fire,
not use this fan with any solid-state fan speed control
device. It will permanently damage the electronic
circuitry.
WARNING:
To reduce the risk of electrical shock, this
must be installed with an lsolating wall control/switch.
WARNING
:
WARNING
:
CAUTION:
CAUTION:
CAUTION:
3
Warranty
Pre-InstallationPre-Installation
SPECIFICATIONS
TOOLS REQUIRED
Phillips
screwdriver
Electrical
tape
Wire
stripper
Flat blade
screwdriver
Step
ladder
NOTE: These are approximate measures. They do not
include amps and wattage used by the light kit.
52 in.
LOW
MED
HIGH
120
Fan size Watts RPM CFMSpeed Volts Amps N.W. G.W. C.F.
3.23cu ft.
0.056 3.2 70 2632
0.2 13 130 4645
0.38 28 170 5590
5.4kgs
(11.9lbs)
6.9 kgs
(15.2 lbs)
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period
of lifetime after the date of purchase by the original purchaser. We also warrant the light kit, to be free from defects in workmanship and
material present at time of shipment from the factory for a period of five years after the date of purchase by the original purchaser,
excluding any glass or acrylic components and wooden blades, to be free from defects in workmanship and material at the time of ship-
ment from the factory for a period of two year after the date of purchase by the original purchaser. We agree to correct such defects
without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you
must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage
to any part such as by accident, misuse, improper installation or by affixing any accessories, is not covered by this warranty. Because of
varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or
peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions, A certain amount of
“wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid.
There is no other express warranty. We hereby disclaim any and all warranties, including but not limited to those of merchantability and
fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited
to the time period as specified in the express warranty. Some states do not allow limitation on how long an imolied warranty lasts, so the
above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in
connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of
incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights,
and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping cost s for any
return of product as part of a claim on the warranty must be paid by the customer.
4
NOTE:
Hardware shown to actual size
Pre-Installation (continued)
HARDWARE INCLUDED
Quantity
GG
HH
FF
EE
DD
6+1
spare
6+1
spare
3
3
3
2
2
1
(preassembled)
Blade screw (preassembled)
(preassembled)
DD HH
CC
BB
AA
GG
FF
EE
Light kit screw (preassembled)
PACKAGE CONTENTS
5
Pre-Installation (continued)
Fan motor assembly
Plastic shade
Light kit plate
H
I
Part QuantityDescription
K
J
12V Battery
1
1
1
1
1
1
Remote control
Remote control holder
Extension lead wire
Receiver
Blade
Mounting bracket (preassembled)
3
B
C
D
Part
A
QuantityDescription
F
E
Canopy (preassembled)
1
1
1
1
Hanger ball (preassembled)
Canopy cover (preassembled)
G
L
M
N
O
Downrod (preassembled)
Light kit assembly
1
1
1
1
A
B
E
C
F
D
K
L
M
O
N
H
J
G
I
6
Installation
WARNING: To reduce the risk of fire, electric shock, or
personal injury, mount the fan to an outlet box marked
acceptable for fan support. An outlet box commonly used for
the support of lighting fixtures may not be acceptable for fan
support and may need to be replaced. If in doubt, consult a
qualified electrician.
MOUNTING OPTIONS
1
1
1
3
2
If your ceiling fan does not have an existing UL-listed
mounting box, then install one using the following instructions:
□Disconnect the power by removing the fuses or turning
off the circuit breakers.
□□Secure the outlet box (1) (not included) directly to the
building structure. Use appropriate fasteners and
materials (not included). The outlet box and its bracing
must be able to fully support the weight of the moving
fan (at least 35 lbs.). Do not use a plastic outlet box.
The illustrations to the right show three different ways to
mount the outlet box (not included).
□To hang your fan where there is an existing fixture but no
ceiling joist, you may need an installation hanger bar (3)
(not included), as shown.
NOTE: You may need a longer downrod to maintain proper
blade clearance when installing on a steep, sloped ceiling.
The maximum angle allowable is 18°. If the canopy touches
the downrod, remove the decorative canopy bottom cover
and turn the canopy 180° before attaching the canopy to the
mounting plate (2).
7
Assembly — Attaching the mounting bracket/
Attaching the Fan Blades
Fastening the blades to the fan
motor assembly
2
Remove the six flywheel screws (BB) from the
fan motor assembly
□Remove the six blade screws (AA) from the fan
motor assembly (H).
1Attaching the mounting bracket to
the electrical box
□Secure the mounting bracket (B) to the ceiling outlet box
with the screws and washers provided with your outlet
box.
WARNING:
B
To reduce the risk of fire, electric shock, or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
A
H
X3
AA
X6
BB
X6
Loosen three preassembled light kit plate screws (DD)
on the fan motor assembly (H).
□
Attach the light kit plate (I) to the fan motor
assembly (H). Tighten light kit plate screws (DD) securely.
□Fastening the light kit plate
to the fan motor assembly
43
Assembly — Attaching the Fan Blades/Installing the Light Kit
8
A
AA
X6
A
BB
DD
DD
I
X6
H
H
H
Attach the fan blades (A) to the fan motor assembly (H).
Fasten the blade screws (AA) one by one.
Fasten the flywheel screws (BB) one by one.
Fastening the blades to the fan
motor assembly
9
Assembly — Installing the Light Kit (continued)
Fastening the Light kit assembly and Plastic shade to the
fan motor assembly
Loosen one of preassembled light kit screws (HH),Connect the light lead wire, align the light kit (G) with the
light kit plate (I) until the screws (HH) engage to the slots on the light kit (G).
5
G
I
I
J
HH
□
Place the plastic shade (J) into the light kit plate (I), aligning the three flat areas on the top flange of the the
plastic shade (J) with the raised dimples in the light kit plate(I).
□Turn the plastic shade (J) clockwise until it stops.
10
Assembly — Hanging the Fan
□
Hanging the fan motor assembly to the mounting bracket
Lift the fan motor assembly(H) into position, and place the hanger ball (E) into the mounting bracket (B). Rotate
the fan motor assembly (H) until the check groove drops into the registration slot and seats firmly. The downrod(F)
should not rotate if this is done correctly.
6
H
EF
B
This manual suits for next models
1
Table of contents
Other BREEZISM Fan manuals
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
