Ballard Designs Taylor Media Tower MQ131 User manual

REQUIRED TOOLS:

Phillips Screwdriver, Flat Blade Screwdriver (levelers)

-Two person installation suggested.

Ltr.

B12

Qty. Hardware/Components Included

Wall Anchoring

(Anti-tip) Kits

See page 3

Serious or fatal crushing injuries can occur from a furniture tip-over

Tip-Over Hazard

Prevent tipping accidents. Anchor your furniture.

WARNING

ANCHORING HARDWARE INCLUDED

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 11-17 -2021 Page 1 of 3

PRODUCT NAME: Taylor Media Tower

ITEM NUMBER: MQ131

ASSEMBLED DIMENSIONS : 82”H x 34”W x 17”D

MADE IN CHINA

(C)

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

Shelf Supports

Upper Shelves

Wooden Plugs

Lower (narrow) Shelf

LEVELERS: Tower is equipped with Rotary Levelers under each corner which are accessible from

INSIDE cabinet. 1. Insert screwdriver through hole in corner, adjust Leveler by turning clockwise/counter-

clockwise. 2. Cover hole with Wooden Plug (C)

REVERSIBLE DOOR: Change door swing (left/right) by using a Phillips Screwdriver to remove metal

Catch Plate, Magnet, Door Pull, and inside compartment, hinge connections. Move all hardware to

reversed positions and replace screws. See diagram below.

(E)

Cleaning and Care

Periodically dust with a soft, dry cloth.

Prevent finish damage: do not use alcohol based

cleaners or polishers. Promptly remove spills.

Page 2 of 3

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

SHELVES: Insert Shelf Supports (B) into pre-drilled holes in upper compartment of Tower. Carefully set

Upper Shelves (D) level upon Supports. Next, insert Shelf Supports (B) into lower compartment then set

Lower (narrow) Shelf (E) level upon Supports.

(B)

(E)

Assemble in location for intended use.

(B)

(D)

Page 3 of 3

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

Installation:

Ltr.

Small Screw

Retention Belt

Qty. Hardware Included

Large Screw

C4 Bracket

WALL ANCHORING HARDWARE (ANTI-TIP)

1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.

2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screw (B).

3. To keep hardware out of view after installation, attach remaining Bracket (C) INTO WALL STUD

with Large Screw (A) 2 inches below Bracket attached to back of unit.

4. Move unit into place, align Brackets then connect both using Retention Belt (D).

5. Confirm Belt is securely laced and locked.

Serious or fatal crushing injuries can occur from a furniture tip-over

Tip-Over Hazard

Prevent tipping accidents. Anchor your furniture.

WARNING

TUD

WALL BRACKET MUST BE ATTACHED TO WALL STUD

(A)

(B)

(C)

(D)

Representative Image

Not meant to be actual item included with

these instructions.

Other Ballard Designs Indoor Furnishing manuals

Ballard Designs

Ballard Designs WS996 User manual

Ballard Designs

Ballard Designs Tuscan File Hutch User manual

Ballard Designs

Ballard Designs Delmar Bar Stool JC336 User manual

Ballard Designs

Ballard Designs Afton Daybed User manual

Ballard Designs

Ballard Designs WS959 WHT 24 User manual

Ballard Designs

Ballard Designs SK075 User manual

Ballard Designs

Ballard Designs Portico Planter User manual

Ballard Designs

Ballard Designs Mia MS102 User manual

Ballard Designs

Ballard Designs Louis MQ080 User manual

Ballard Designs

Ballard Designs UM013 User manual

Ballard Designs

Ballard Designs Tuscan MV197 User manual

Ballard Designs

Ballard Designs Louis XVI Poster Bed MB372 User manual

Ballard Designs

Ballard Designs Giardino JC378 User manual

Ballard Designs

Ballard Designs Dover Shiplap MS106 User manual

Ballard Designs

Ballard Designs Saratoga SL074 User manual

Ballard Designs

Ballard Designs Harper Sideboard SF038 User manual

Ballard Designs

Ballard Designs Gracie WN202 User manual

Ballard Designs

Ballard Designs Millstone SK110 User manual

Ballard Designs

Ballard Designs Original Home Office Craft Station MO528 User manual

Ballard Designs

Ballard Designs Miles Redd MR Shell MS050 User manual

Ballard Designs

Ballard Designs Newport Demilune Table with Shelf TC352 User manual

Ballard Designs

Ballard Designs MB489 User manual

Ballard Designs

Ballard Designs Large Eastman Secretary MO386 User manual

Ballard Designs

Ballard Designs Grove MQ125 User manual

Popular Indoor Furnishing manuals by other brands

Homelegance

Homelegance California 1662PEK-1CK Assembly instruction

Osmond Ergonomics

Osmond Ergonomics FLO instructions

OVE

OVE ELOISE 42 installation manual

overstock

overstock MF286255 Assembly instructions

Sonoma

Sonoma 160-801 Assembly instructions

BOLERO

BOLERO Wicker Side Chair CF158 Care Instructions

Coaster

Coaster 4799N Assembly instructions

Stor-It-All

Stor-It-All WS39MP Assembly/installation instructions

Lexicon

Lexicon 194840161868 Assembly instruction

Next AMELIA NEW 462947 Assembly instructions

Furinno

Furinno 18089 Assembly instruction

Munchkin

Munchkin Push to Close MK0001 manual

impekk

impekk Manual II Assembly And Instructions

Elements

Elements Ember Nightstand CEB700NSE Assembly instructions

JWA

JWA CARY 68429 Assembly instruction

VIPACK

VIPACK AMORI AMKB9014 Assembly instructions

Anthro

Anthro GT03 Series Assembly instructions

Rowico

Rowico SANNA Assembly instructions